LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Flight Simulator controls

    As I explained in my blog entry, I've been absent because work has kicked in hard, and because my hobby time right now is spent working on an R/C glider that had been gathering dust for years. Maybe once I get that done I can get back to making sawdust in something other than balsawood, but then...
  2. When Hobbies Collide...

    I figured I'd post this even though it's more of an entertainment project. But it's made out of wood. :D It's a custom arcade stick for PC, PS3 and PS2 use. The buttons and balltop light up. You can see a video of it in action here. The wiring took a few evenings because I was being pretty...
  3. Joystick Fight Stick

    My brother wanted me to make him a new joystick for his Street Fighter game. This is what I came up with. This was a lot of fun to build and quite a learning experience. I routed the entire insides out by hand a little at a time starting from the middle and working my way out to the edges, both...
  4. Curly Maple Joystick

    Here is a project that I had fun working with. This was built for a customer to work on his Playstation 2 console game system. The joystick and buttons are real arcade controls and are connected to a Playstation game pad. All the buttons have a shop cut veener inserted and the joystick top...
  5. Lacewood Joystick

    Here is one that I had intended on keeping for myself. However I ended up trading this for some nice wood for more projects. The sides of the case have a slight slope to them compounding the mitered corners. Getting the angles on this took several trial cuts that I did using MDF before...
  6. Power Tools, Hardware and Accessories
    Does anyone know where to purchase very large wood clamps. I need some capable of clamping 2in. thick beech lumber 8in. wide by 12 ft long. The clamps need to clamp to a width of at least 3ft. wide. They will need to have large wheels to drive the clamp screw. I also need a motorized glue...
  7. Power Tools, Hardware and Accessories
    Got a Question. Just got a Delta T2 fence for my Craftsman hybrid TS, the holes line up on the rails, I never remember ever using the fence to the left so does anyone think moving the rails to the right a notch cause any problems ? It will give me 8" more rip, Ill just move the scale. Thanks Mark
  8. Power Tools, Hardware and Accessories
    I have my bandsaw tuned up just right. I can resaw 8" Hard Maple with almost no blade drift. The wheels are coplanar, and I can go from 1/4" to 3/4" blades with a quick adjustment of tension and guide bearings. But I can't get a 1/8" blade to stay on - it quickly wanders off the front edge of...
  9. Power Tools, Hardware and Accessories
    this is and older model 14 " free standing made by Taiwan sheng tsai model # kl-w569 the problem is the top guide wheels broke off, when i was at the tool show a few months ago. i saw a universal guide system. I cant seam to fine it on the net. I will take some pic to show you all Russ
1-9 of 9 Results
Top