LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 249 Results
  1. Chair

    Chair made to match dessk for my daughter. Solid walnut with faux suede cover over two inch foam pad.
  2. Friction Fit Wooden Jewellery Box

    In this video I will be making this beautiful Jewellery Box, designed for some Cuff Links. This is a simple build and can be made very easily with limited tools! It contains Mitre joints and a cushioned bottom to protect the Jewellery. Please see the full video build on my YouTube channel to see...
  3. Oak and Walnut Keepsake Box

    Oak and walnut box, hand cut dovetails in construction, with a walnut inlay.
  4. Scarf joint ceiling beams

    Made some hallow beams for the ceiling of my house. Made out of douglas fir and pine barn boards. Corners are miter joints rolled over with a screwdriver and hooked together with a locking scarf joints. Sanded, stained natural, and finished with 2 coats of gloss polyurethane. Beams are...
  5. Barn board kitchen cabinets

    Made some kitchen cabinets out of floor boards from a haymow. Most boards are elm, with some birch, red oak, white oak and maple. The boards were in the haymow as floor boards for around 80 years. The carcasses are made with 3/4" birch plywood. The drawers are maple with finger, dadoes, and...
  6. Hand Joinery Bedside Table

    Quarter-sawn Mahogany, 2010 "Hand Joinery Bedside Table" was my first project completed at Rochester Institute of Technology. The requirements for this piece was to use all hand tools to make a small table, using only the bandsaw to rough out general shapes, every finished surface and all...
  7. Jordan's First Box

    A couple of years ago I had brought some pallets home from work. The intent was to salvage what lumber we could from them and build some bat houses. The pallets had some fiberglass and white gel coat overspray on them. After Jordan (my youngest son) and I started cutting them up one of the...
  8. Wooden Box using Finger Joints - Includes sliding Dove-Tail Lid!

    In this video I will be making this wooden box. It's made from cherry and is constructed using box joints. It has a sliding dove-tail lid allowing access to the inside of the box. Please see the full YouTube Video if you want to see all the steps I did to make it! Hope you enjoy the video...
  9. Bookcase/Gate for Wide Opening Between Rooms

    We have a wide opening between the kitchen area and family room in our home. Sometimes we want our dogs to stay in one of those areas. When we moved in a few years ago we put in a wide baby gate but the dogs finally wiped it out trying to go through the narrow opening side by side too many...
  10. Magnets & Secret Compartment for my Handgun!

    I had two goals for this project. First, upgrade our keychain holder that hangs by our front door. Second was to store and hide my handgun when it isn't in my pocket. Goal #1 was accomplished by building a 12×18 x 5" keychain holder made of cherry. It is finished in a couple coats of Deft...
  11. Improv Fir Step Stool

    This project is an attempt to use up material (fir) and supplies (Minwax Polyshades) I have on hand. At my wife's request, I made a project that has some use around the house; a step stool. The step stool also doubles as a sitting bench for my daughter's activity table, which is our old coffee...
  12. Plane Till Storage and Expansion

    As my planes have been multiplying, I've finally gotten around to upgrading the plane till I put together for them. The first thing, as you see in the first picture, is that I had to expand over. I grabbed a No 5 1/2, 4 1/2 and 8 off of ebay in the last few months, and I still hold hope for a...
  13. Whirlygig, Santa

    Latest whirlygig for a friend.
  14. No jig box joint box

    LOML wanted me to pick up a box at the store to keep things together in the medicine cabinet of out fifth wheel. I told her I would make one that custom fit the spot. I had never made a box joint before, so I decided to try it. I didn't have a jig and not much time to make one, so I marked...
  15. Live Edge Walnut Dining Table-Mini Conference Table On Steel Base

    This top is made from 2 1 3/4" thick reclaimed natural edge slabs of walnut. Base is two 3" square tube steel frames 22"w x 28"h. Total build is 7 1/2'L x 29 1/2"h width varies from 24 3/4"- 31 1/2". It is heavy, heavy, heavy. Finished in a satin Waterlox mixture. I had a LJ buddy help me...
  16. Arts and Trash

    I thought this up to tidy the area behind my living room desk. It holds two paper grocery bags, one for recycling and one for trash. Red Oak and Black Walnut. Super Blond Shellac topped with Satin Poly. I can provide sketchup and links to the scroll work upon request.
  17. Eclipse photo frame

    Hey all! I made this picture frame to commemorate our viewing of the total eclipse this year (2017). The photo within is my own as well - it is a mosaic of images of the progression of the eclipse, totality, and then the exit 'diamond ring', above a view of both horizons during the eclipse...
1-20 of 249 Results
Top