LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 500 Results
  1. Projects Cerused Jewelry Box

    My first stab at cerusing a jewelry box. Box is made from red oak, textured, painted black, added white gel stain, then finished. Had a lot of fun with this one.
  2. Jewelry Box

    Made out of walnut solids and Sapele veneer. Aprox. 15" x 15" x 9" deep. In the last picture is the recipient, my niece Anna.
  3. Walnut and Maple box

    Walnut and Maple dresser valet I made as a Christmas present. The is the second box I've made, so it has a few flaws. The small feet are walnut, the box is maple, the splines are walnut, the lid is walnut and maple, the handle is a small piece of walnut I picked up off the floor. The spline jig...
  4. Jewelry Box

    I had a little walnut burl veneer left over from a vanity I had made my wife last summer. Thought I would cap it off with a matching jewelry box. The box and drawers are solid walnut and the drawers have the walnut burl fronts. Purple is her favorite color, so I lined the drawer bottoms with the...
  5. Solid Walnut Bible Box

    This is one of our classic bible boxes - done in solid walnut with a dogwood interlaced carving on the front panel. Very simple with wooden hinges. American black walnut. We make a few of these type boxes a year between other big projects. Last photo is a strait angle - different box but...
  6. Lichtenberg Pattern Jewelery Box

    After playing with the wood burning technique introduced to me by Jim Jakosh I decided to put the results into a project. The overall outside box dimensions are 11.5" x 7.5". The top overhangs about an additional inch on each side. The top is 7/8" thick, but the steep taper makes it look a lot...
  7. Routed Jewelry Box

    The jewelry box is based on a design first posted by SPalm (http://lumberjocks.com/projects/57088). I modified the design in several ways. First, I increased the size to 12" x 6" x 6 1/2" , increased the number of pivoting drawers to six, each with a magnet to insure firm closure and added a...
  8. My Wife's Christmas Present - A Jewelry Box

    Another project with wine boxes as the main source of wood.
  9. Bandsaw box #7

    Made for a dear friend who survived breast cancer.
  10. Christmas jewelry box

    Jewelry box Christmas present made from Birdseye maple, katalox, walnut, redwood burl, and hard maple. Finished with semigloss and gloss polyurethane. Secret compartment hidden in the base. Brusso hinges.
  11. I <3 Oregon 7

    I had another request for my Oregon designed jewelry box, this one from my buddy who just recently celebrated his first year with his girlfriend. He said he wanted to get some kinda western themed design to it if I could, and this is what I had in mind! The majority of the box is douglas fir...
  12. Medium Boxes With Lift Lids

    Decided to build a couple of smaller boxes than I usually build. The darker box is smoked eucalyptus veneer with cedar lining on the inside, walnut trays and maple trim. The lighter box is also a veneer that I was unable to identify, also with cedar lining on the inside, walnut trays, african...
  13. Sunburst Lidded Keepsake Box

    Sunburst Lidded Keepsake Box This will be a gift for my mother's upcoming birthday. It is made from cherry and walnut. It has 90 deg stop hinges and is lined with rose colored felt. It is finished with four coats gloss lacquer Thanks for looking !
  14. Jewelry Box by a first timer

    I got the woodworking bug a couple of months ago (first post here), so this should be called the $3000.00 Jewelry box since I'm sure I've spent that much in the past couple of months on tools! It's my wife's birthday so I thought I'd make her a Jewelry box, sounds easy enough. (Not!) I'm an...
  15. Oak Park Jewelry Box in Cherry & Leopardwood with Mahogany slips & Brass hardware.

    This box is titled Oak Park for Oak Park, Illinois and is the first suburb to the West of Chicago. Best known as home of the studio of Frank Lloyd Wright. This jewelry box is a commisioned piece in Cherry with splined mitered corners, floating beveled panel Leopardwood top and removable solid...
  16. Decorative Box

    This Mike Jagielo decorative box design is made from tiger maple and bubinga. It measures approximately 11 1/2 inches wide, 5 1/2 inches deep, and 3 1/4 high. The tapered legs are at a 4 deg angle which gives it kind of an oriental look. The lid pivots on pin hinges. For a finish, I used...
  17. Live Edge On Top Of Live Edge - Mens Valet Box

    I don't know if I had already mentioned it but I just had Orthoscopic knee surgery done last month so it kept me out of the shop off of my feet and on my butt. I'm still recovering but am able to spend short periods on my feet in the shop. Men's Valet Box I hadn't done any live edge in a...
  18. The White Box

    Yet another gift box. This one is a wedding present for a cousin who is marrying in May. The box is walnut with a cherry lid. Simple mitred drawers, splined sides to reinforce the mitres. The interior is cherry, as is the top. Felt lining for the trays and drawers. The wood for this box is...
  19. Small Jewelry Chest

    Built this chest as a birthday gift for my mom, she collects buttons / pins. The case is walnut, the drawers are soft maple with tiger maple fronts. The case is finished with two coats of general finish's American Classic water based die and several coats of a 2# cut of shellac The drawer...
  20. Cherry and Maple Jewelry Box

    Good morning all!!! This is my second and only other box I have made. I have so many more ideas but just finding the time between my other work is a challenge!!!! This custom jewelrey box was made for my niece who graduated high school in mid May 2016. It is made from wild black cherry and...
1-20 of 500 Results
Top