LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 500 Results
  1. Underwater World

    Hello all, it's been awhile since I posted a project because of my broken hand and then playing catch up to get some projects done. This one took AWHILE to finish because it was 341 pieces and a lot of them where very small. I spent a lot of time down on my hands and knees looking for a piece...
  2. The Dawning of a new Box

    This project actually dates back to March of 2013, but I still think it is worthy of being my first project post here at LumberJocks. This was my first attempt at intarsia or inlay, so there is a lot of room for improvement, but I am still proud of the effort. The woods used are curly maple...
  3. Intarsia Eagle

    My first attempt at an intarsia project was this 90 piece intarsia eagle with a 24 inch wing-span. Made out of walnut and aspen, finished with water-based varnish and a little paint (yellow beak and feet). Pattern was found in one of Better Homes and Garden's WOOD magazine. Hope to do another...
  4. Eagle Intarsia

    This project is an instarsia piece called "A Furious Lady!" The pattern is by Annja Starett and is featured in the March 2010 Creative Woodworks & Crafts magazine. The pieces were cut on a scroll saw. The woods are: aspen, balsa, western red cedar, sycamore, lacewood, ebony, yellow heart...
  5. Getting Ready for my Winter Show

    So i was accepted into my first craft show (first time applying, it was a juried show and i got in). So my plan is to make around 100 intarsia ornaments for this show… Not to mention a couple of kaleidoscopes, a few cutting boards, 8 photo frames, some wine stoppers, and a few bandsaw boxes...
  6. Find a Home for an Intarsia Carousel Horse Wall Hanging

    I really had some fun making this piece and it was a real challenge. I saw a picture on the internet and made a pattern based on that with Inkskape. It ended up having 190 different pieces with 13 different kinds of woods. The pole was a real challenge to make out of a block of yellow heart...
  7. First Intarsia Attempt (Teddy Bear)

    I have to credit fellow LJs KoryK and TrippleB for peaking my interest in Intarsia. KoryK posted an Intarsia class and blog that gave me the confidence to try this art form. This free Teddy Bear pattern is included in a E book class called Intarsia 101. Since this was my first attempt at...
  8. Dragonfly Wall Art

    This Wooden Wall Hanging Dragonfly is hand carved and created using a 3D intarsia effect . This Dragonfly and Cattails are made from Padauk and Maple set on a Basswood live edge Oval. The Dragonfly and Cattails are hand painted with oils and the entire piece is finished in lacquer to protect...
  9. Church - Intarsia

    This intarsia piece is the white country church with steeple. The church is 19½" x 16" and has 70 pieces. Wood is Western Red Cedar and aspen and is finished with Old Masters Clear Finish gel varnish. I used a wood burner on the steeple and the horizontal lines on the church building. I made a...
  10. More intarsia...labrador, cat & goats

    Lab is walnut, alowood (blue), cedar, wenge….Judy Gales Roberts pattern Cat in bag is Ph Mah, Maple, Wenge and walnut…...Judy Gales Roberts pattern Goat patterns I made from the adjacent photos and are made of pine, cedar, redwood, basswood, poplar All finished in lacquer.
  11. No strings attached My version.

    First off, I'd like to thank Dan, Eklund for the great Guitar pattern in the Holiday issue of SSW&C magazine about a year ago. This was so fun yet so hard for me to cut. It was a great challenge for me. I used 17 different woods in this. I like the colors I used but may do a second one and make...
  12. giraffe

    The body is made of two different cedar boards,the mane is walnut
  13. Its spring!

    here is a pair of nutthachers, I had spring in mind doing these. this is a Bruce worthington pattern
  14. Intarsia Dragon (SPYRO)

    I asked my daughter to search the web for what she wanted me to make her and she picked out this pattern. It was purchased off eBay from kbennett702. It intimidated me, but once I got started… it wasn't so bad. Had to redraw some of it and improvise some pieces. She asked that I not use the...
  15. Cabin Intarsia

    Had fun with this one. After my grandmother retired from teaching she opened an art studio in an Appalachia Ohio log cabin that had been built in the1930's. I have many childhood memories of playing in and around this cabin. Working from a photo, I drew the pattern and then cut and shaped the...
  16. intarsia cat

    I made this cat for my wife for christmas. It is my first try at intarsia. The legs and bottom of the body are made of popular, the rest of the body is made of oak, the eye, ear and nose are made of wenge, and I forget what I used for the forehead. I cut all the pieces with a scroll saw, fit...
  17. Maple Box with Intarsia Rose

    This box is made from Maple with an Intarsia Rosebud with leaves decorating the top. Cherry splines reinforce as well as decorate the corners. The inside contains a removable tray and a 7 inch oval mirror. The inside of the tray is lined with high quality red micro fiber while the bottom is...
  18. Marlin (Intarsia)

    I just finished this piece for the "Artistry in Wood Show in Bloomington Mn. this weekend Nov 9 & 10 at Southtown Mall at I94 and Penn Ave. stop by if you live in the Twin Cities. I used Hackberry, Walnut, Ebony, Walnut, Blue Pine, and Butternut for the frame.
  19. I can't believe I finally got it done.

    I had a minor mishap in my shop about 2 weeks ago now that pretty much stopped me from getting to my shop for a few days. I had already started on this elephant, he was already pretty much done when this happened. Now I don't know about anyone else but when I am in the middle of a project and...
  20. Another Heron

    This is another Heron that I made. Another one is here in my projects. Not a set pattern, more like one I took from several different pictures and patterns of Herons Out of the two I have here on LJ's I think I like this one a bit better. After hanging and taking the pictures I saw that my...
1-20 of 500 Results
Top