LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 500 Results
  1. Projects Custom Pistol case

    A custom made pistol case made of solid mahogany plus walnut and ebony banding
  2. Projects CNC Inlay

    Had to test drive some new CNC router bits and inlay settings. Was very pleased on how the coaster turned out.
  3. Projects Wall art. Walnut with aluminum wire inlay and purple heart accent

    I have a friend who is a foot model on Instagram. I made this for her from a picture of her feet. The artwork was traced in Adobe Illustrator. I cutout the shape on my bandsaw with a 1/4 inch scrolling blade. Tuned up on the small HF belt sander. Then I used a router attachment for my...
  4. Projects Low back swivel bar stool

    Sapele swivel bar stool of my own design with rosewood inlay. Maloof joint used to join backrest riser to seat. Compound angle legs with mortise and tenon joinery. Carved seat using rotary grinders. Video 1: I created several videos detailing some of the construction which you...
  5. General Woodworking Discussions
    Hi everyone, I am working on a project for my sister and need an idea about how to inlay some trim wood. I am making a three sided open box that will mount on her wall and hold vinyl records. I want to inlay the piece of purpleheart (3/8" thick) in the pic at a 45 degree angle at each of the...
  6. Projects Walnut Box with Copper Wire Inlay

    I call this my learning box. Started out as a Craftsman style box but my tendons were off 1mm from the mortises. Doesn't sound like much but would have stuck out like a sore thumb even with an 'added feature' repair. Best laid plans of mice and men kind of thing. Wood was too pretty to toss...
  7. Projects Penguin Inlay Medallion for Headboard

    When I built my granddaughter's convertible crib in 2019 (delivered the day she was born), I embedded a replaceable teddy bear inlay medallion in the headboard, thinking I could update the bed with something age appropriate as she grew. Well, years passed, and just as she moved from crib to...
  8. Stone Inlaid .22 Stock

    I share a shop with a gunsmith - so I guess it was only a matter of time before someone asked for stone inlay in a gun! This .22 came in only partly functional and with a stock that appeared to have been "modified" at some point by someone with more energy than skill. Since it was going to be a...
  9. Inlay puzzle coasters

    This project has been sitting on a shelf, half finished, for some time. I finally got a breather from projects I had to do and decided to finish these up since during the last year I've been asked if we have any more coasters. These were actually made as an experiment in inlaying splines in wood...
  10. Mesquite Vase

    Mesquite wood vase from the family ranch with malachite inlay thanks to the geology professor at the local junior college. used a Robert Sorby Hollowmaster on the inside. Didn't take as much as i could from the inside so its a little heavy but still loved the hollow master.
  11. Barstool Stone Inlays

    I was given a pair of old bar stools by customer and asked if I could "save" them. They were in pretty tough shape and had, at some point in their life, been given a haphazard and unfortunate coat of stain (far more "Molting Hyena" than "Dark Walnut"). Normally I build everything that I do...
  12. not sure what to call this cigar

    While working on my double knot, I wanted to make something else as well. Here's what I came up with. upper barrel: the dots are maple inlays (they only appear on the side of the pen currently displayed). I used a forstner bit and plug cutter to make these. lower barrel: The long strip is also...
  13. The Dawning of a new Box

    This project actually dates back to March of 2013, but I still think it is worthy of being my first project post here at LumberJocks. This was my first attempt at intarsia or inlay, so there is a lot of room for improvement, but I am still proud of the effort. The woods used are curly maple...
  14. Lazy Susan with Inlay

    I had wanted to try my hand at doing simple inlay, and had a few pieces of 4/4 walnut lying around that I thought would be a good candidate for the experiment. Also, we had a need for a place to put serving dishes, hot things, and salt & pepper sets, etc, on the kitchen table I finished this...
  15. Guitar

    Came home from college over winter break. Had to scratch my itch to do woodworking. It was extremely cold! The white inlay, saddle, and nut are deer bone from a carcass i found in the back field (i know a little gross). A lot of sanding to sculp things (heel of the neck especially). Everthing...
  16. Picture Frame

    I made this picture frame to give to my father for Christmas. Back in August of 2012 my family had the unfortunate news that my dad had stage 4 esophageal cancer. He had 6 tumors all together in his throat and on the liver. We were initially told he would not make it to Christmas and...
  17. Walnut Cremation Urn

    This is a Cremation Urn I made for my sons 12 year old friend who suddenly became ill and passed away. He was very active in his school band and very active in his church. His parent requested a design that would incorporate his love for music and the church into the urn. It is constructed if...
  18. A simple Cribbage Board

    Long time stalker. First time poster. I started making man glitter a couple of years ago. Every year my dad gets a cribbage board of some sort. Here is this years offering. The base wood is Ipe (pain in the workbench to work with). The inlay is a curly maple, bubinga and lacewood. A few...
1-20 of 500 Results
Top