LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 244 Results
  1. Incra/Jessem/Milwaukee Router Table

    After talking about building a good router table for a year now, I finally got around to it. I looked at countless base designs. Almost going with the Abrams design I changed my mind at the last minute and ordered the Incra base. I really wanted to get up and running in a reasonable time and...
  2. Custom Fence Extension for Miter Saw

    June, 2012-On a recent project I needed to cross-cut multiple pieces to the exact same length. Measuring and cutting each piece individually got old fast. So I decided to build an extension fence for my DeWalt miter saw. The fence is on the left side of the saw. Two pieces are store-bought...
  3. INCRA MagnaLOCK Ring Holder

    I made this little ring holder for my INCRA rings to my router lift. I made it out of scrap 1/2" Baltic Birch ply. I made 4 extras b/c I have 4 more to buy to complete my set down the road. Easy project, and will help organize my router table drawers.
  4. INCRA Router Table Cabinet

    I bought this INCRA combo #3 w/ INCRA's II router lift and the Porter Cable 7518 off of a guy on CL. I spent the next week designing and planning this build until I ordered the lumber last week. This was my FIRST real woodworking project ever, I had a lot of mess ups, taught myself a few things...
  5. music stand for my son

    hello ljs - been messing with this for awhile - my oldest son made a national drum corp this year (trumpet) so i thought this was in order. he also has a hard rock band (a city divided) lead guitar - the project is made from curly maple , hard maple , and padauk. the mechanics were changed...
  6. Maggie and SAm

    these woodburnings went to alaska. sam the little one is my daughters dog. her xmas present maggie the white one is her bosses dog. cute little guys arent they.
  7. Router Bit Box (my first box)

    I needed a box for my growing collection of router bits. I have been steadily amassing router bits so I purchased a foam bit "tray" from Rockler. The tray holds a selection of 1/4" and 1/2" shank bits. I thought "someday" I would build a simple box to hold that tray and in the meantime, it...
  8. Incra cutting board

    Hi Guys! This is my second "incra" project. I learned a lot with it, had several problems, so trying to get ready for the next one! 1.- the first time I tried this project my chinese saw didn't want to cut the hardwood without burning (1,5 inch height). After some reasearch the problem was in...
  9. A Home for my New Router --- (Router Table)

    I got a new router (Bosch 1617EVSPK) for Christmas so naturally, I needed to give it a good home. I decided that a nice new router table would be the way to go. I quickly planned what I wanted and put the necessary parts on order. This included an Incra 25" joinery package, 27" x 43" top, and...
  10. Obligatory cutting board #1

    My first project. Nobody will be impressed with the complexity of my design or workmanship, but I did learn a few things while making this. It was a lesson in working wood for the pleasure of it. I had starte a much more complicated project involving many small pieces and requiring a lot of...
  11. Did someone say something about sanding??

    After I recovered from the reaction to the lacewood on the last project - we decided that although we won't cut lacewood again we really liked the design that we came up with… so we decided to give it another go with something a little less risky. Back to our old standard - Curly Maple and...
  12. Storage solution for Incra Miter 5000 Sled

    I haven't posted anything in awhile, but I have been trying to find a satisfactory way of storing my Incra sled. I wasn't happy about setting it on the floor (carefully of course). I tried to do some searches online, and some utilized the holes in the sled and used hooks in the wall to hang...
  13. A simple project - CD Box

    We had some red oak and decided to try a simple cd case - finished with wipe on poly. Just a basic half blind dovetail joint. The oak finished really well - very easy to work with.
  14. Folding MFT-style Bench with Router Table

    I wanted a portable MFT-style bench that would fit into my SUV but that was lighter than my existing Festool MFT/3 tables. I was about to make a somewhat modified version of Ron Paulk's workbench using plans that I had purchased from him, with the modifications involving making it shorter so...
  15. A basic Incra design - simple trinket box

    We were looking for a good color alternative to the lacewood we were using and decided to try padauk - This is a really beautiful colored wood - Box is made out of red oak and padauk, cornerpost dovetail. We were using just lindseed oil to finish and discovered that the padauk bleeds into the...
  16. Stella's Box

    So this is my first post and first project - my "freshman effort" if you will. As you can see it's a simple sliding top box made out of walnut, curly maple, and wenge, and finished using 2 coats of tung oil with maroon felt on the bottom of the interior. The purpose of this box was simple: our...
  17. Home Brewed Router Table

    This is a router table which I designed following my purchase of an Incra LS17 Positioner. The problem which required the design is that the Incra LS17 requires a "deeper" table than any generally available. The top is simply a piece of melamine into which I routed a place for a Rockler lift...
  18. Humidor

    Humidor I built for myself. Maple top, front, back. Mahogany base. Hickory sides. Mahogany inner dovetails. Spanish cedar lining.
  19. double ended incra ts/ls and new router table

    this not for the weak at heart it has taken a few weeks to get this corect but it not works great. it was the only way i could think of still using my incra system with the new saw. my old saw had the access door on the right so the router table was on the left. no issue the fence was on the...
  20. Incra Router Table

    Some of you have followed the build here (sorry they are mixed in with other blog entries….should have made a separate blog) First I would like to say that I'm not independently wealthy, I aquired the extruded aluminum very cheap, so that the only reason for using this cool material...
1-20 of 244 Results
Top