Search Results for ‘hook’

Made from white oak with a poly finish Made for a fellow rider

Hi all. This is a game called hook and ring or bimini or ring the bull. Tie a string to a ring and swing it to capture the hook. I had a piece of cherry i wanted to find something to do with so… the finish is spray on poly. I gave this to a friend who loves to play different games. And yes that...

My son helped design this Belt Rack for our belts. Lots of good fun and learning! I've got some details loaded at the Instructable here: Marco's Belt Rack

Holding pocket hole joinery components on edge has always been an issue, therefore a new jig. And here is mine. I've used Melamine because glue won't stick to it, and I had everything in my scrap bins. As shown, I've taken advantage of a groove already milled on the back by adding a cleat so it...

I took a short break from cleaning the shop today to cross a project off of my project list. I made a bench hook. The bench hook can be used for sawing boards with a back saw and also as a shooting board for small parts. This hook is based on an article on Popular Woodworking web site. They...

One day I needed a couple of saw hooks to get a little job done. So I quickly threw together what you see in the first box/pic. Those suckers lasted 4 years and only recently demanded an upgrade. The new hooks are deeper - wide - & work together to better handle long stock. I used some Rock...

Made this coat rack for my entry way over the course of the last few weekends. The big disaster on this project was deciding to do the glueup at 4 AM after working most of the night. I wasn't prepared at all, ran out of Titebond in the glue bottle and substituted Gorilla glue… Also glued up...

This Bow Rack holds 2 bow and 12 arrows with or without broad heads because the head of the arrows sits in the draw away from little hands. In the top right and second pitcher is a horse shoe hook that I welled up.

Hi All, Wow…it has been a long time. Here is a towel hook project that is going in my Mother's bathroom. The wood is Beech, stained to match existing woodwork, finished with shellac and poly. I discovered that it is not that easy to find a vertical reference line on a hand-shaped oval! The...

This was a Valentine's Day project for my daughters in 2017; replicating the hook used by the character Maui in the movie Moana. I was inspired by the Wood Whisperer and the plans he posted. Rather than using an ordinary (pine or fir) 2×4 as he did, I used cedar because I wanted a particularly...

The size of the table is 28" wide x 68" long x 36" tall. The base is made out of Alder with two hard maple dovetailed drawers on blumotiom soft close undermount slides. The top is made out of Hickory and is hand planed and distressed, there are hand turned Hickory pulls on the drawers. The legs...

Maori fish hook necklace - hei matau Material: Heat treated ash tree - The massif of an ash-tree which underwent processing by hot steam. One of essential advantages of thermally processed ash - tree is it's moisture resistance and mycotic affections of wood

Fish hook necklace Material: Stabilized maple burl

This is a White Oak coat rack that I made with custom ebonized hooks. Shelf was installed with a dado joint and the support is a french cleat. Hooks are ebonized with first a coat of strong black tea and then a steel wool/vinegar mixture. I also blacked the screws with super blue. . . . The...

---------------------------- This knife has been "SOLD" contact me at my email address if you would like something similar: email: [email protected] - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Specifications: Handle: Elk Naturally Shed Antler Handguard: Yellow Brass Blade...

This is so simple I know that it has to have been done before. It's kind of a pain lining up the holes on a Random Orbital Sander. I just took a 6" square piece of wood, drilled 4, 3/8" holes lined up using a disk and glued in some dowels. The dowels have been rounded at the top. They stick up...

At my work, I had a little plastic hook that hung over the cube wall for hanging up jackets and things. Well unfortunately, it broke. So, rather than going out and spending another $3 on a coat hook, I decided to make this. It is solid walnut, with oak pegs in the base. The base is 2 pieces...

Coat Rack for my office space. Hangs on the Cubicle wall. I little hefty but the intention was to use some scrap wood I had laying around. Cubicle wall has cloth so I threw some Velcro on the back pieces to help hold in place.

------------------------------- This Tall Walking Stick was a commissioned piece, so it has been "SOLD" Cane Serial Number #2008-36 Height: 42.5 inches Welcome Surfers: If you are surfing looking for a special walking cane on the internet, go toward the bottom of this posting where you'll...

---------------------------------- This Hiking Stick has been "Sold" and resides in Phoenix, Arizona USA ---------------------------------- Serial Number #2008-37 Height: 53.75 inches Welcome Surfers: If you are surfing looking for a special walking cane on the internet, go toward the bottom...