LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Custom Library Build

    Finished a room renovation to convert my living room into a library. I added in a coffered ceiling and a gas fireplace too. There is a link below to a video if your interested in the finished project or want to see the details of how i built the room. If you have any comments or suggestions...
  2. Craftsman Mantel

    So, thanks to Schroeder, I'm back. It's the first major woodworking project since the accident. I can honestly say that turning the table saw back on was an exercise in willpower. Anyhoo, I think it looks pretty good. It's my own design (basically an inverted version of Schroeder's). The finish...
  3. Fireplace

    My wife hated the old fireplace mantle and hearth which was made from flagstone so this spring we ripped it all down and I spent the next two months fixing drywall and then building a new hearth and mantle. The hearth is made from particle board and poplar. The mantle is mdf and poplar. All the...
  4. another fireplace surround w/ mantle...

    We did the entire wall with a combination of applied moldings and lots of millwork; Cabinets built into large coves gave us plenty of room for creating the art. The fireplace hearth is marble but doesn't show here. Except for the corbels and the rope trim, all the milling was done at our small...
  5. Walnut and Cocobolo Frame for Hearth Pad

    This is a hearth pad that I built for our wood stove. The frame is walnut with cocobolo splines for added strength. I have a full description on how I built the rest of the hearth pad on my blog HERE Thanks for checking it out! The wood stove is my garbage disposal for botched woodworking...
  6. Hickory custom fireplace

    Hickory fireplace custom built for a repeat customer.
  7. Joinery
    I normally use 3M blue painters tape to mask off areas that I don't want glue squeeze out to get on. This method has worked well for Titebond woodworkers glue. The other day I did the same procedure and then used J-B Weld glue and found that the tape lifted up and J-B Weld got under it. I was...
  8. Focus on the Workspace
    First of all the cart was inspired by Jay's project , the dust collector was from YouTube Above the normal frustrations of a small shop I was tired of tripping over my shop vac and it taking up so much space so I found inspiration from Jays post. Now I just wheel that booger around and its...
  9. Woodworking Skill Share
    I have built a basic 32" cabinet using 3/4" birch plywood for the sides and poplar for the face frame. My challenge now is matching the color of the two pieces (which I am sure is a common issue and one that many of you have run into before!). I am trying to use Minwax Red Chestnut stain. I...
1-9 of 9 Results
Top