Search Results for ‘handrail’

Final got around to putting a handrail at the top of the stairs. Used Maple for the handrail the goes down the stairs and VG doug fir for the handrail at the top of the stairs. Made the all profiles to match a profile used many years ago. it was probably a stock item 50 or 60 years ago. Had to...

This custom staircase and handrail is made from Hickory and stained to go with the wood flooring that was installed at the top of the stairs. The Craftsman style design was derived from some of the architecture in the house. If you want to see it be fabricated please check out my Video...

My new project of Glass staircase with Two tone Dual wooden Balusters, I am set up new concept of glass stair with Two Balustrade Glass hang between two balusters with D Bottom Posted By Mahadev Wood Industries

This is back when I had real tools. I set up shop right there in the basement den, and built away. It's constructed of poplar and maple, primed and finished with 3 coats of satin enamel. There are 3 low voltage lights in the lighted cabinet. I removed a 1950's wet bar in front of where the...

This is a Walnut stair handrail transition i made for a fellow woodworker at his wits end. I spent a bulk of my time making sure what i was gonna make would fit…... but hey….theres only like a few steps to any woodworking project…You can saw it, plane it, shape it, and sand it…thats about it.

July 28, 2022 To resolve a safety concern a handrail for 3 steps in our backyard garden was finally finished and installed. It started with two 6 X 6 and a 2 X 6 treated wood that were recovered from a neighbor who just replaced his deck. The tops of each 6 X 6 post was cut 20 degrees on four...

a redwood structure I just finished a few weeks ago. i need to upgrade my work camera, the dates are wrong.

I built this staircase for a client in 2007. The work also included trimming out a large upstairs addition, built-in cabinets throughout the house, and various other tasks as they arose. My client was doing a lot of the work himself, and we worked together a lot of the time. Everything was made...

This was a custom home I built a few years back. Talk about a scary staircase. I was 24 years old at the time, only a couple years out of college. That was my first experience with bending rail. What a great project to have under the belt.

In my home I have a flight of stairs with a wooden railing, formed by three axes fixed to the ends of the columns to. This railing is not very stable is a bit ' dancer so I decided to build a solid handrail anchored to the wall. This project has been in the drawer for some time, for fear of not...

My old sailboat needed new cabin-top handrails so I made these last winter. I wanted handrails beefy enough that they would hold under the weight of an adult man hanging from them in storm conditions. That meant both that the wood needed to be thick enough to withstand the strain and also that...

I had some scraps left over from my bench and decided to make some modern style handrails. I actually measured my wife's hand to get the ideal shape for her to hold it at the angle of the stairs. That and the countless coats of MinWaxPoly make it very comfortable indeed.

How about that my very first chopping block made from camphor laurel with a rosewood frame, I got carried away so I made a smaller one as well. The large one is 500×400x70mm and the small one is 500×300x70mm made frome the same materials and using titebond 111 a waterproof glue and oiled with...