LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Demilune

    White Oak and Mahogany with Minwax Antique Oil Finish "Demilune" uses compound angled floating tenon joints, tapered bent laminations, veneering, and hand cut joints with hidden room for expansion/contraction. With this piece I decided to focus on taking a very traditional French/Italian...
  2. Hand Joinery Bedside Table

    Quarter-sawn Mahogany, 2010 "Hand Joinery Bedside Table" was my first project completed at Rochester Institute of Technology. The requirements for this piece was to use all hand tools to make a small table, using only the bandsaw to rough out general shapes, every finished surface and all...
  3. Cherry jewelry box

    This is one of two jewelry boxes made for my daughters for Christmas. Made of cherry with walnut dovetail keys in the mitered lid. All stock prep/joinery was done by hand. The dovetail keys were tricky but fun to cut. Finished with oil/varnish blend and coat of wax.
  4. Inlay Dovetail Zebrawood and Wenge Jewelry Box

    This is a Zebrawood and Wenge jewelry box I made for my mother in law for Christmas. The zebra and wenge dovetails were cut with two sets of tails and fit together. Then I cut another set of tails into the wenge and pins into the zebrawaood. It really looks 3D and I love the look. The lid and...
  5. Blogs
    Canasta These images document some of the process of my most recent completed project which was a reliquary dedicated to my Mother. The requirement for this project was to design and make a Reliquary utilizing a door and a drawer. Our warm up project was to fit a drawer with half blind...
1-5 of 5 Results
Top