LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

481-500 of 500 Results
  1. Power Tools, Hardware and Accessories
    I am planning to buy either the Grizzly G0513×2b or G051×2bf. Both list the size of the base as 27" x 17 3/4". Grizzly sells a mobile base made by Shop Fox that lists its size range as 20" x 20" to 29" by 29". Since I happen to already have this Shop Fox base I plan to use mine. But if the...
  2. Power Tools, Hardware and Accessories
    Yesterday I went and got my new Grizzly G0513X2BF bandsaw from the Springfield, Missouri, location. Today I am putting it together and mating it to the Shop Fox mobile base. Grizzly Tech Support said to put a 3/4 to 1" plywood raiser so that the bottom door will open. I can confirm that this...
  3. Power Tools, Hardware and Accessories
    I am new to lumberjocks as well as being new to woodworking overall. I have been looking for a new table saw and seen this on craigslist. What I am wondering is this saw worth the price as well as what do i need to look for when i go to look at the saw thanks. Bellow is the link...
  4. Power Tools, Hardware and Accessories
    I decided to go ahead and extend my rip capacity on the table saw tonight. I wasn't able to just undo the bolts on the rail and move it to the right like I had thought. Instead I had to drill a couple of holes in the angle. I measured the existing holes and drilled 1" from the left end and...
  5. Power Tools, Hardware and Accessories
    On my now Grizzly bandsaw I have two dust ports, one where the blade goes through the bottom guides, and the other at the bottom. Until I have time (and money) to work up a dust collector setup that would use both ports, I can plug into only one port. Which one would you suggest?
  6. Power Tools, Hardware and Accessories
    When I got my new Grizzly G513×2bf bandsaw I aligned the upper and lower bearings so that when I turned the blade manually none of the bearings would turn. I did this with the upper guide about 12 inches above the table. Yesterday, I was playing around and cut some thin strips of 3/4" material...
  7. Power Tools, Hardware and Accessories
    Hello! I've been eyeing up the table saws and dust collectors in the current Grizzly sale. I don't need them right now, since I have a few things to do in my shop space first. Basically, I can wait a couple of months. Would I be better off going for the current sale or waiting for a...
  8. Power Tools, Hardware and Accessories
    Ordered a bunch of Grizzly stuff that I ultimately regretted. Sold everything and closed my Grizzly.com account.
  9. Power Tools, Hardware and Accessories
    There is a 16" Grizzly Bandsaw, that I have an opportunity to purchase for $200.00. I could use the help of the "collective" in determining if this is a good saw and worth purchasing. I was looking at a new 14" Grizzly Deluxe G0555LX ($445.00) or possibly the 14" Grizzly Extreme G0555X...
  10. Power Tools, Hardware and Accessories
    Hello Folks! Great site with tons of useful info! Looking at ordering the Grizzly G1023, just wondering if I should get the RLW with the built in router table or get the RL and the T10222 Router Extension Table? I currently have a smaller shop and a dedicated router table does not fit the...
  11. Power Tools, Hardware and Accessories
    I have a seperate thread on a 1989-90 right tilt G1023 I purchased via Craig's and have been restoring over a longer period of time then I care to admit. The project isn't why it's taken so long rather the rest of my life that happened around it. Basically between my last post in that thread...
  12. Power Tools, Hardware and Accessories
    Hey everyone I've been lurking this forum for a while, first time posting however. I'm looking to put a dust collection system in my two car garage. Looking at grizzly a site they offer a 2hp unit with a 1 micron "canister " style filter for 445. And a 3 HP unit with two filters at 2.5 microns...
  13. Power Tools, Hardware and Accessories
    Copy and paste or follow this link to an ad i found on craigslist today. Apparently, this guy isnt quite happy with his Grizzly stuff. Ive owned some of thier tools and what this guy is saying may be somewhat true. However, I wouldnt go order new tools thinking these are gonna sell any time...
  14. Power Tools, Hardware and Accessories
    I just chatted with the Grizzly customer service rep: Welcome to grizzly.com Brian, Grizzly Customer Service 5 will be right with you. Grizzly Customer Service 5: Thank you for choosing Grizzly. My name is Katie, how may I help you today? Brian: Hi Katie, do you know if there is a black Friday...
  15. Focus on the Workspace
    In a few weeks I'll be moving my family and my two-car garage woodshop from California to Maryland. We're moving ourselves using ABF's U-Pack. So I we get to do all the packing and loading, though we'll have some help unloading. This weekend I'm going to start the process of packing up the...
  16. Power Tools, Hardware and Accessories
    I am very soon going to buy a new Band Saw of which the main purpose of owning one is to resaw logs and also thicker materials. As most of you know ,Woodcraft is having it's sale on the Rikon 18" model 10-345 for a great price of $999.00,a very attractive deal on what I understand to be a great...
  17. Power Tools, Hardware and Accessories
    I have the older G1182 and don't have the right wrench to remove the bolts for a knife change. The manual is not helpful. Two questions: What is the size of the gib bolt? Are they left hand thread?
  18. Power Tools, Hardware and Accessories
    Hey gang - I'm new to the forum but have lurked here enjoying all the info and insights. Thanks to that insight, I'm looking to finally pull the trigger on buying my first serious table saw. After much agonizing, I decided on the G1023RLW from Grizzly (the one with the router extension) even...
  19. Power Tools, Hardware and Accessories
    Purchased my first jointer today, a 6 inch Grizzly with a 46 inch bed on sale for $408. I previously had to rely on lumber being straight enough to work with, or even using my router table to joint boards for edge gluing. I'm a novice woodworker, and I plan to use this machine for many years...
  20. Power Tools, Hardware and Accessories
    So I picked up the Grizzly G0645 Mortise Machine over this weekend and I am running into a small issue that I am hoping someone has a work around for. When I setup the chisel and bit into the chuck and bushing and tighten the set screw to hold the chisel, the set screw forces the chisel out of...
481-500 of 500 Results
Top