LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Contemporary Reclaimed Barn Wood Side Table

    This contemporary table was one I built for fun. It's made from a reclaimed white oak "door buck" (threshold) from a stack we have at the yard. It's 3" thick and 24"x24". The cube is a 24"x24"x24" steel frame I welded and then had chrome dipped. It's a very simple design. I like having all the...
  2. Another Ulu

    I ended up with a bit of extra birds eye maple after making a full kitchen knife set for my parents, so to complete their set, I decided to use the scrap to make my mom a Mother's Day present - an ulu, which is a traditional Inuit skinning knife. I bought a couple of these blade blanks a while...
  3. Mission Style Bookshelf made from ... Cherry

    Made from solid cherry, this mission style bookshelf has two adjustable shelves to maximize storage choices. Dimensions are 60"H x 30"W x 13"D. I cut the plugs with a (newly purchased for this project) 3/8-in plug cutter so I was able to match (somewhat) the grain. Starting from rough cut...
  4. Woodworking Skill Share
    I miscut a mortise on a leg for a chair…I am going to glue in a piece of wood to fill the hole that will be hidden behind the apron…I have gorilla glue polyurethane glue, gorilla pva glue and titebond III…which will give me the best strength on the fill? Thanks in advance for your help, Grub
  5. Joinery
    Hey guys- I have an old mid century modern chair that I am trying to take apart and refinish. My guess is it is probably from the 60's or so. The joints are all mortise and tenon or dowels with really good tight fits. Chair is maple. I am not sure what kind of glue was used, but a few of the...
  6. Blogs
    My Favorite Glue Scraper Hey everybody! I have been very busy between working on my client's projects, squeezing in a project for another contractor, and rebuilding my website. As if that wasn't enough, I decided to shoot a video to share with you what my favorite tool is for scraping off...
  7. Woodworking Skill Share
    When the glue-up of my bed footboard dried I saw that the backside on one corner did not close and left about 1/8" gap in that area. Should I / Can I fill it with something?
1-8 of 8 Results