LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 20 Results
  1. Classic Oak Silverware Box

    Classic red oak silverware box. Raised panel top and sides. Top compartment houses single items while drawers hold a set of 16 utensils. Lining is black Suede-Tex. Drawer sides have stopped grooves allowing drawers to slide on hardwood runners. Drawer fronts are fitted with tiny solid brass...
  2. Painted Corner Cabinet

    Painted pine corner cabinet. Custom top molding. Hand-cut through dovetails join the drawer sides to the drawer front and back. Finish is a urethane fortified latex paint. Door painting done by my wife Johanne.
  3. Spade Foot Side Table

    Solid maple side table. Unpretentious top with breadboard ends. The tiny pieces joining the upper and lower aprons are tenoned to fit into matching mortises in the aprons. Legs are tapered on their inside faces and end with a spade foot. Finish is brushed nitrocellulose lacquer over aniline...
  4. Arts & Crafts Coffee Table - Two Flavours

    These coffee tables are almost identical except for a few details and the wood species. One is made out of solid cherry. The other is white oak. Built in the Arts & Crafts style. The square holes in the top are echoed in the main stretcher below. Breadboard ends add stability and the...
  5. Birch and Walnut Sideboard

    Solid birch sideboard with walnut bead detail around the door and drawer openings. Mortise and tenon construction throughout. There are a couple things I am particularly proud of about this piece. One is the wood grain selection. The narrow pieces (rails, stiles and legs) were milled from...
  6. Hockey Stick Rack

    Raise your hand if you've ever seen a piece like this one ;-) This is a traditional-form hockey stick rack, custom built to house a customer's 20-stick collection from the 2007 Ottawa Senators ice Hockey team. Locking bars prevent unwanted removal of the sticks. Solid birch and birch veneer...
  7. Pine Writing Table

    White pine writing table with a small footprint to fit in a bedroom. Legs are tapered on their inside faces. Bead detail on the lower edge of the apron. Hand-cut half-blind dovetails connect the drawer sides to the drawer front. Drawer slides on hardwood runners. Finish is a satin...
  8. Pine Corner TV Stand

    Solid pine corner TV stand loosely inspired from traditional French-Canadian cabinets. The six inch high open cavity provides a decent amount of space for AV equipment. Raised panel doors swing 180 degrees to allow easy access to the bottom compartment, which is fitted with an adjustable shelf...
  9. Walnut Burl TV Credenza

    This TV credenza features solid walnut and walnut burl veneer top with a curvy front edge, a design detail that is repeated in the base, legs and drawer handles. The 1 1/8" thick solid walnut pieces that wrap the walnut burl veneer panels of the top are joined at the corners using...
  10. Dining Table

    Dining table somewhat rustic in style yet refined in construction and finish. Features a 1" thick solid walnut top. Other elements are made out of red oak. The horizontal pieces of the leg assemblies also serve as a portion of the table top and are joined to the vertical pieces with massive...
  11. Narrow Bathroom Built-in Storage Towers

    These narrow built-in towers were ordered by a customer in dire need of storage in a tiny bathroom. Built from birch veneer plywood and solid birch. The stain and all design elements were dictated by the style of the vanity that was already in place. The drawers run on full extension slides...
  12. Headboard and Footboard

    Solid birch headboard and footboard for a three-quarter bed. Frame and panel construction using 1 1/2" thick frame pieces. Raised panel is 3/4" thick. Grain uniformity achieved by using wide boards so that no edge gluing of boards was necessary except for the panels. Rails are joined to the...
  13. Threesome of Living Room Tables

    Solid red oak and walnut living room tables built for the same home as the dining table also described in My Projects. All tables feature leg assemblies where the horizontal pieces form part of the top and are connected to the vertical pieces using bridal joints. Finish is Minwax natural oil...
  14. Bedroom Closet Built-in

    The starting point for this project was a typical bedroom closet with bifold doors. The first step was to re-frame the door opening to make it almost as wide as the inside of the closet space. The idea to go with painted bevel-edge raised panel doors and drawer faces stemmed from the...
  15. Studio Side Table/Candle Stand

    This project only took three years to complete! Finally completed it yesterday. It was a personal project so other ones always seemed to take priority over this one and I only worked sporadically on it. My goal was to design and build something really distinctive and use it as a showcase...
  16. Walnut Entry Seat

    This is a simple black walnut and maple entryway seat sized to fit in the available space. All solid wood construction except for the seat bottom, which is walnut veneer plywood. It will eventually be covered by a cushion the customer will make herself. Rails and legs are connected using 3/8"...
  17. Dining Room Wall Unit

    Dining room wall unit built from birch veneer plywood and solid birch. The bottom section is a single cabinet with three compartments. The profile of the doors matches that of the kitchen cabinets (not seen). The doors were ordered on the web since I don't have the equipment to mill this...
  18. Teacher's Easel

    The wife of a former colleague started a teaching career a month or so ago after staying at home to raise three kids until they were all old enough to go to school. She was in need of a dual purpose easel. One side is a dry-erase whiteboard the other is a flip chart paper pad holder. The...
  19. Large Living Room Wall Unit

    This solid oak and oak veneer plywood unit is 9' high by approx 14' linear feet of facade. All built, stained and varnished in the shop, then installed in the customer's home. The challenge was to design it so minor modifications could be made during installation and still get perfect...
  20. Power Tools, Hardware and Accessories
    I had a DW7491RS jobsite saw that needed one small e-clip to repair the riving knife attachment assembly. I am fortunate to have a DeWalt Service center close to home, so I took my saw in for repair. The service center folks entered the saw information into their system, and it came back...
1-20 of 20 Results
Top