LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Wonder-ful wood burned plaque

    This plaque that I made has a very special meaning to my fiancé and I. I made it for our pet cat named Wonder when he passed away almost 2 years ago. He was very special to us. To my fiancé he was even more special she rescued him when he was only a few weeks old when he was sick and no one else...
  2. Sanding Table

    In an effort to help control sanding dust in my shop, I decided to build a dedicated sanding table. This one has an additional benefit of being an air filtration system, with an old furnace filter I salvaged installed inside. You can leave it on while working elsewhere in the shop, and it will...
  3. Removable Shop Furnace Enclosure

    My shop happens to include the oil furnace and oil water heater for the house, naturally located in the center of the wall and breaking up MY space. I guess it could have been worse and been in the center of the basement. Anyway, as this was pre dust collector and air cleaner, I wanted to keep...
  4. Power Tools, Hardware and Accessories
    Hi Jocks, My Mom had her furnace replaced last spring, and I saved the old one, not knowing what I might do with it. I was thinking, maybe use the blower from it, in a homemade dust collector. I don't know what the horsepower or amp ratings on it are; the clamp band that holds the motor in...
  5. Focus on the Workspace
    Hi LJ, it's been YEARS since I've been on the board and this is my first post in a long time. I'm going to be moving to a new house in about two weeks, and I'll be able to upgrade my shop to a much larger utility room. Unfortunately, the water heater and two furnaces are in one corner of the...
  6. Safety in the Woodworking Shop
    I've managed to convince the wife to let me have part of the basement as a shop area while I try to figure out what this woodworking thing is all about. The room is about 14' square, with appx 4×4' in the far corner occupied by our incredibly ancient gas furnace. I've been reading that there...
  7. Power Tools, Hardware and Accessories
    Well to start I want to say I have until 1/6/14 off work. I have been spending a lot of time in the shop planing. I was wondering what you all do to keep from over filling your DC. I have a custom 3 HP cyclone with a barrel separator in line before the cyclone. It can be seen here. It has a...
  8. Woodworking Skill Share
    I only heat my shop when I'm in it. Today I went out to work a little even though it was 9 degrees here overnight, and even colder the last few days when I had the sense to stay in the house. Turned on the furnace and began. When it was time for a glue up, I picked up the Titebond Molding and...
1-8 of 8 Results
Top