LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 25 Results
  1. flower arrangement

    This is a bit of a cheat, because I was only involved in a minor way in this project. However, I'm posting it because I think it is gorgeous. I have a customer who is a wonderful gardener. For the past couple years she has come to me for help with her display for the annual "Art in Bloom" show...
  2. Flower Box

    This was just a small box I saw in a restaurant one morning that I decided to make. The box was pretty simple; the only new part to me was turning that handle on my lathe. I wanted the handle to spin so I just made the middle part thicker than the ends that fit through the holes on the side of...
  3. Flower Box Planter

    I had intended make four of these, but after the first one I gave up. I want to make things that will last a long time, and not rot in 10 years.
  4. Cedar Planter

    I had opportunity to create this planter to be donated to a fundraising event for our local hospice home. I lost my sweet husband to cancer nearly 10 years ago so this hospice organization has a huge soft spot in my heart. I'm always happy to give back to the community by using the gifts the...
  5. Cedar Planter Box

    I purchased this plan from PlansNow and made a planter box out of Eastern Cedar for my wife's flowers. Assembled with butt dados and screws, the panels are multiple boards that ride in a groove in the top and bottom rails. Obviously this can have some serious expansion and contraction through...
  6. 1st Project Post - Flower Planter Box

    I went with this just to get my feet wet now I have to make about 5 more for our deck.(I'll have to post the deck and rustic cooler later, they were done with hand power tools and a miter saw) Lots of firsts here… First Project post First Project use of Table Saw (Thank you Lumberjoe and...
  7. Cedar FLower Box

    Two flower boxes mad of cedar.
  8. Tulip Bandsaw Box

    My wife loves tulips which were a part of our wedding day. I decided to make her a bandsaw box, originally as an anniversary gift which turned in to a belated Christmas gift. I used black oak and walnut that I milled from our property and neighbor's tree. I used 7 coats of poly to finish it...
  9. Raised garden boxes

    A nice gentleman I know from work has fairly substantial hip and lower back problems. Hes gardened for many years. Not too long ago he and I spoke about his regret of not being able to get down in the dirt to tend a garden any more. I told him that I built a few raised beds for my mother. He...
  10. Lil Red Wagon

    Here are a few pictures of a recent project that I made. It is all made of poplar except the wheels and the rails on the top of the bed. The wheels are Brazilian cherry and the rails are oak.. I turned the wheels on the lathe. The wagon is approximately 18" long and 9" wide. It stands 8"...
  11. Cedar Flower Cart

    I borrowed this idea from WILLIEL, who posted his 144 days ago. Thank you Willie! I made this for a fundraising auction to be held in November, for our Methodist Church. I turned the wheels on the lathe and inserted 1/2" copper tubing in the wheels for the axle to turn on. The front support...
  12. Cedar Window Boxes

    I was commisioned about a month ago to build these flower boxes. They are 32" wide, 11-3/4" front to back (not counting the mounting bracket - Pic #6), and 6-1/2" deep. I used Titebond III along with #20 biscuits and pocket hole screws to hold everything together. I did not apply any type of...
  13. Reclaimed Barn Wood Raised Bed Planter - Large

    Very simple build. This is a douglas fir raised bed we built and then coated with elastomeric paint. Then we did a lightly sandblasted mushroom wood facade. Mushroom Wood is one of the reclaimed materials we carry at our lot. It comes from barns where they grew mushrooms and the enzymes from the...
  14. Outdoor Living

    Built this for my girlfriend last summer, she liked it.
  15. Privacy entrance with a twist

    This project was for a customer wanting a privacy fence with a small portico, double swing doors and flower boxes. Other than being paid the funnest part of this project was making and installing the saloon doors. Another happy and satisfied customer.
  16. Cedar Flower Boxes

    Since I am on Easter Break I figured the best way to relax and pass the time would be to work on some projects. Here are two flower boxes I made. The box on the left is sort of a board and batten style. The box on the right has no upright supports, just cedar fence panels. Which style do you...
  17. flower planter box

    This is a long and narrow flower box for the shelf outside the kitchen window. It's made of redwood, finished with exterior penetrating oil and measures 58" long × 12" high × 10" wide. I built this box using plans from...
  18. flower planter boxes

    Finally finished two planters made of redwood for my wife. I used plans from WoodsmithPlans.com, WS15916. The wood came from a local landscaping yard. The finish is redwood color penetrating oil. It was quite a project involving some mortise/tennon joinery (cut with table saw). I have tried...
  19. Flower box

    I built this out of pine 12 3/4×10 x 5 1/2
  20. Flower box

    I built this out of pine and put marine varnish on it.11 3/4" x 6 3/4" x 5 1/4
1-20 of 25 Results
Top