LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 107 Results
  1. Floating Shelf Project

    Floating Shelves. My son asked me to make him some shelving for his TV room; something sort of modern and minimalist. These were made from a recycled hollow core closet door. I cut the door down the middle, exposing the innards. Then I cut back the cardboard webbing inside, and glued and...
  2. Floating shelves and lit bottles

    I have build three floating shelves for in the office of a friend of mine. He ownes a video company and recently did a video shoot for a chemics company. He had some left over props and wanted to do something with it. So I build these shelves with led spots upside down in it. The bottles stand...
  3. Asian ispired kitchen table

    From a project of Dirk Edmund
  4. 4 floating shelves for kitchen

    My daughter and fiance (finally !!!!) moved into an apartment downtown. Their kitchen is old-style apartment small, and had an unused nook on a wall. Tight spaces abhor a vacuum, so I made them 4 floating shelves. The tops and bottoms of the boxes are 1/8" sanded ply, and the sides are 1/4"...
  5. Floating Shelves

    Well the wife wanted floating shelves in the kitchen. I had some 1" mesquite boards on hand, which match the wine rack. So, the wood selection was done. My mounting hardware selection was somewhat limited with the board thickness I had to work with. I did not want any of the hardware visible. I...
  6. The first bench

    I made this one as a wedding present for my brother in law. All solid Scottish oak and I was able to find (after an enjoyable 4 hours burrowing in the timber stacks) a beautiful piece of pippy oak for the seat. Added the 'cross' motif on the end trestles to match the couple's existing...
  7. Hall Table - Wedding Gift

    Hi all! I made this table as a gift for my sister and her new hubby for their wedding. It was very well received. For the top I chose a very nice piece of QS Bubinga. Not quite waterfall figure, but very nice none the less. It is a single board a hair under 13" wide. I would have like the top...
  8. Modern Floating Vanity

    Just finally finished putting on the drawer pulls so I could get some finished pictures of this uploaded. I built this vanity out of sapele wood. Carcass and panel were joined together with dominoes. I wanted to make sure this thing was rock solid and could take the weight of what I required...
  9. Built in shelves in not so square spaces.

    These shelves are made from old reclaimed oak boards. They had to be mounted invisible in recessed space. The only problem is that those spaces were not square and straight at all. I have used a simple adjustable template to get a tight fit. The walls are made from plastered gypsum blocks. I am...
  10. Floating Platform Bed with Drawers | Custom

    This is a platform bed designed by the customer. It had a total of 12 drawers which are similar to my captain's drawer pedestal. From there an inset pedestal with a platform was added, giving it a floating feeling. This was completed in October 2012 The wood was oak with a black lacquer...
  11. Odd Corner Entertainment (Floating) Stand

    My mother wanted a place to put the TV on the fireplace wall and needed a custom piece. A little rough but I learned a lot in the process. It's anchored to the wall on the left side and uses the fireplace ledge for support on the right side. The height and width of the LCD threw a wrench in...
  12. Platform Bed

    The is the platform bed that I made for the new house. I wanted a simple looking bed frame that does not take up too much space because my wife and I are a bit minimalistic. The last picture shows the frame and the only downside to this is if we both sit on the edge of one side, the bed starts...
  13. Floating ring SUCCESS!!!... sort of.

    Yes, I know, it's another candle stick holder… What can I say, I'm on a roll! (I'll yank myself out of my comfort zone soon enough). This is the first time attempting a floating ring, this thing is about 12" long, made it out of Tigre Caspi wood - I've never heard of this kind of wood before...
  14. Floating Shelves

    Floating shelves made from 3/4" maple and 1/2" maple ply. The finish is dye, followed by shellac, followed by stain and then a top coat. Shelves are attached to the wall with a 1.5" x 2" wooden cleat.
  15. Cherry/Walnut Floating Top Hall Table

    Thanks for looking! The build of this table was partially inspired from a similar table by Mike Pekovich (FWW #263 sep/oct 2017). I always look forward to his write-ups since he makes stuff I like 8^). Other style influences came from several sources, anyway it was a fun build! The dimensions...
  16. Wall box

    This project was my introduction to pocket holes. This pair of wall boxes is made of one-inch thick cherry and each one measures 10"x10"x4". Because the holes were on visible sides, I decided to use plugs that I made from a maple dowel. I think it took longer to hang them level on the wall then...
  17. Walnut & Maple Floating Top Table

    Aside from "The Wood Whisperer - End Grain Cutting Board" this table was one of the first projects I ever attempted. I found the plans for it in Wood Magazine, but I'd have to look for the specific issue. I created a few brief blog entries for the build over at my blog at wvwoodshed.blogspot.com...
  18. Scylla Console

    Hi, I want to share with you my last project, this is my first time that I do these kind of joinery.. made from white oak. I share with you a link to the whole process - please feel free to Write some advices, hope you enjoy.
  19. "Floating" Reclaimed bed frame with drawers

    I built this bed frame for a customer a few years ago. She had the head board so i had to match the frame to it. She wanted a "floating" design with drawers built into the sides. The bulk of the structure was actually built with new from the lumber mill oak for strength. Once the frame and...
  20. Floating media cabinet and shelf

    This is a floating media cabinet that I made for my father in law. The basic goal was to create some sort of storage solution for the media components and dvds that did not sit on the floor and a clean design. It is constructed of oak ply and solid oak edging and drawer fronts. The cabinet is...
1-20 of 107 Results
Top