LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 84 Results
  1. French 4lb Canon Restoration

    The first resident cannon the Monmouth Battlefield State Park Museum, this reproduction French four-pounder was donated through the Friends of Monmouth in dire need of attention. Artisans Artisans replaced the rotted cannon trails and reinforced the axle. The wheels and hubs remained intact and...
  2. "George"

    George was the nickname my sister gave me as kids! So he was created out of birch on the lathe initially and then carved for further details. Painted with acrylics. Always loved puppets!
  3. Fire department Logo

    Fire department logo I made for my brother's department. Its about 2 feet in diameter.
  4. Slightly modified New Fangled Workbench

    The bench is only slightly modified from the original. I made it six feet instead of eight to fit in the space I had available. Pretty much as soon as I was done my wife said I could have both bays of the garage, so now it's just shorter for no reason, but that doesn't mean I'm going to...
  5. fireplace mantle

    mantle surround made poplar
  6. Fire Appliance Pumper

    This project has been real long term one No plans Build from memory and various photos and then changed things to what might have been
  7. Cedar Bandsaw Box

    This is a bandsaw box, in the shape of pacman. This is after you beat the game, where realistically, he would be super fat by all the dots he ate. I took some wood, and cut a pacman looking out. No real measurements, just made it as close as possible. Then after cutting the drawer out I sanded...
  8. Fire, race, school

    Another batch of little chubbies, these are from last weekend. This is some for a good friend of ours Grandchildren, who are visiting from Mexico this weekend. The race cars came out pretty cute, I think. I have had that idea bouncing around in my head for a bit now, so it's fun to see it...
  9. five board bench

    standard five board bench made for a co-worker. Pocket hole joinery used throughout. Wood is the cheap pine from the box store. Painted a dark green.
  10. Shou Sugi Ban tabletop refinish

    First try at shou sugi ban. We had an old patio table with a plastic top that had broken. The steel frame was still in good shape so I stripped it of the old stuff and installed these pine planks. Tiger torch made quick work of the burning. After it was brushed with a wire brush I added a coat...
  11. Corner Mantle Over Tile

    This is a mantle I made for my parents' corner gas fireplace. The builder left it with ALOT of tile around (and a horrible window overhead). Before and after pictures above! I built it in place as opposed to in the shop and carrying it in. I built the surface out about 2.75" from the inside...
  12. Fire Pit Table

    We were in need of a new table for our deck. I thought it would be nice to be able to have a small fire pit built in to it. The top is concrete with a drop-in LP burner. The table base is red oak finished with GF gel stain and GF outdoor varnish. I have a 20# propane tank sitting inside of...
  13. Art Deco Fire Screen

    Just made this fire screen for a friend who has an art deco style living room, same place the table and cabinet I just made went to. Its veneered in Bubinga and Birdseye Maple with some Wenge inlay. The feet are made of solid Bubinga. Its finished in lemon shellac to match the table colour I...
  14. Wooden art

    Brand new to site. Just three pictures of art I created with wood!!!!
  15. More for the table...

    As mentioned craft fair next week. Here are the additional new items I am putting on the table. Extendable Magnetic Pick-up tools Travel Scissors- I am also going to put out a selction of seam rippers that I have not had out in a while and see how they do. Key chain lighters- Kits from Craft...
  16. book shelf

    Pair of bookshelves for a customer.
  17. Fire truck bed

    Hello, I made for my son a firetruckbed
  18. Kansas Flint Hills Prairie Fire Thumbsticks, Hiking Sticks from Black Walnut, Elk & Deer Antler

    -------------------------------------- Cane Serial Number #2008-24 - green composite malachite, "email me for more information" Cane Serial Number #2008-25 - aqua composite turquoise, SOLD, in Emporia, KS Cane Serial Number #2008-26 - Elk antler crown (GONE), in New Braunfels, TX Height for...
  19. Workbench (shopmade)

    My very first woodworking project was to build a workbench. I chose a plan that would not bee too difficult for a beginner without a lot of tools but be sturdy enough to last. I then added a dual-screw tail vise.
  20. Cedar Swing

    Built this cedar swing hung it from 8×8 pressure treated pine.I had also built the shadow box fence that is in the background.The fence was built 1 year before I installed the swing
1-20 of 84 Results