LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Trim board tapering jig

    Trim board tapering jig 3"x 48" made from MDF to taper header boards
  2. Craftsman Tappered Columns

    Tell Me What you Think I would Really would like to Know There are 5 of them. Plus the Ceader Foe Beam scarfed, construction adhesive, and hand nailed. These are the templates I made from 1/8" hardboard, roughed the blanks out, then I just pattern cut them on the table saw Column Corner...
  3. Master Bath Make-over

    Decided to try a combination project …. a little remodeling with some added woodworking projects. So I did an upgrade to our master bathroom. Added a little character over the whirlpool tub and changed the the look of the double vanity area … so this required some new tasks; framing &...
  4. Finishing
    Hi. I am new here. I wanted to upload more pictures, but it seems to only allow one. Anyway, here is my African Mahogany stair base. I did the base and casement for an entire house. It has been nailed on except for around the mirrors which is glued. After everything was in place I did a Miniwax...
  5. Sweating for Bucks Through Woodworking
    Hello, I'm just a hobbyist with a small garage shop and still learning with every new project. Someone who had seen my finished projects has offered me to work on several small finish carpentry and woodworking projects. Semi-high end projects, like shelves in closets, a drawer chest, an isle...
  6. Wood & Lumber
    Hello. I am doing a remodel on my house and getting ready to start the interior trim. My house is over 100 years old and I am looking to trim out the windows. Previously I had no casing and just had it finished with drywall, corner round and an apron that was made out of poplar. Question I have...
  7. Designing Woodworking Projects
    Looking to get some other peoples opinions on paneling / wainscoting ideas for our living room area. We are planning on wrapping our entire living room area and part of our dining room in a 50" - 54" high vertical nickel gap (shiplap) or board and batten style. (leaning towards shiplap right...
  8. Blogs
    Making and Installing Custom Door Trim Here's a detailed video with lots of tips on installing custom door trim. It covers plinth blocks, casing installation, and making a 3-piece cap for the door casing. The key tool I use in this video is my miter saw and the dust collection hood I...
  9. Blogs
    How to Replace Trim on a Pre Hung Door See how I built this custom door trim and learn how to replace trim on a pre hung door. There are a few steps that need to happen in the right order to make the job easier to do. I hope you enjoy my latest video. Scott Video Link->
1-9 of 9 Results
Top