LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 20 Results
  1. Rustic Bull Horn Cabinet

    Built out of Pine and the drawer fronts are old, grey, recycled material with long horn steer drawer pulls. Taking to the little town of Sisters, OR to sell in a store….RODEO season! Not sure how much to sell it for though? Hmm?
  2. Second project - still not a box...

    I struggled a little with my first project because I only had an old kitchen table and a set of Triton SuperJaws to work with. I knew, therefore, that my next project would have to be a workbench. The Bench is made from Beech and the design is courtesy of Fellside Studios - Cumbria UK. To keep...
  3. Zero Clerance Insert

    So I have been looking on here and it seemed like one common thing is that people have is their own zero clearance insert. I didnt want to buy one, so I made one!
  4. The DK9-er (De-Caniner)

    The DK9-er (aka De-caniner) was commisioned by a fellow who had issues with a neighbor's Doberman Pinchers. A neighbor down the street owned two mature dogs and one day when walking pass their yard, they were both barking at him which was alarming enough but when he had passed their territory...
  5. Total Service Reward

    Created this coin holder for a well deserved veteran; my father-in-law. He served this country in both military branches and I am thankful or his service. Made it out of cherry with Cabernet stain and tung oil.
  6. Sidewalk Sign

    A sidewalk sign for my wife's pottery studio show next weekend (2) 8' lengths of 1×6 x 5/4 deck cedar and cut it into 2.5" strips, ran a dado in the center for sign to insert. Mortise and tenons for the bottom rails and lap jointed two 3/8" slats for each top rail and glued everything together...
  7. Woodworking Skill Share
    Would like to know if it's happening and when directions will be made availible…
  8. Power Tools, Hardware and Accessories
    Just thought I would show off my new sandpaper and scrap storage cabinet.. A couple weeks back we got a call from a friend letting us know that one of the local thrift stores had a huge paper storage rack laying out front. We went by to take a look because my girlfriend has invitation and card...
  9. Power Tools, Hardware and Accessories
    After reading how people are using key stock as gauge blocks, I was trying to find some. went to the local ma-and-pa hardware store, but they had no idea what it even was, let alone had any. Where did YOU get your key stock from? was it a specialty store? box store? any known name store...
  10. Wood & Lumber
    I have a small eucalyptus grove (approx. 40 trees) that are about 25 years old, so you can imagine how large they are-i'd say around 3 stories high. We've been cutting some of the larger branches designing yard bordersa and furniture with them. I have so much I wanted to see about selling it...
  11. Blogs
    HUGE Eucalyptus score Sheesh. Good thing I have a truck now. I saw a note on craigslist today (online classifieds) that a guy had put "10 to 15 more" eucalyptus logs out in the alleyway behind his house. LA is all blocks split in half by access alleys big enough to drive 2 cars through...
  12. Blogs
    What was your first experience with handplanes? Mine was about 7 years ago, I still wasn't doing anything woodworking like, and we had moved to a new apartment where the bathroom door wouldn't close since it was too tall and would hit the jamb (well- actually we mounted one of those...
  13. Blogs
    Camphor Laurel-YES! Trying to start a blog kinda like Gary Fixler's. Those types of blogs really interest me and I thought I'd share my own stories. I haven't done much blogging so laugh quietly if I do something wrong. A few weeks ago, our nieghbours came over for a BBQ. We were talking about...
  14. Blogs
    Murphy Bed Plans CONTEST: Ever wanted to build you own murphy bed. Email me the answer to the following question and I'll send you the plans. [QUESTION: On the cut list for the do-it-yourself kits, what is part "F".] This can be found on the website wwbeds.com Three steps: 1. Find it; 2...
  15. Blogs
    Local Finds "The inner compasses of the mind must encircle the whole quantity of material beforehand" - medieval poet Geoffrey de Vinsauf. Here's a few before shots, as in before I know what I want to make with them…. ..and… That's a soda can in the middle for reference… • In the...
  16. Blogs
    Lost & Found: The Literal Splinter in the Sawdust Stack. Well, I was getting ready to assemble a 16×20 frame, when I realized that the woman who ordered it needed to give input on the finish. While inspecting it, a piece just fell off with the sligtest tough from my finger. I didn't think...
  17. Blogs
    Another Sandy Salvage After a seemingly successful beach driftwood project earlier this summer, I knew that the next trip to the beach would include a hunt for more treasures, perhaps even ones of the slightly buried variety. Again the family returned to Sargent and again the Texas tides did...
  18. Power Tools, Hardware and Accessories
    10ER With the following: Shaper Fence, Front Table Extension, Retractable Castors, 2 1/2" Joiner Cutter, 2 1/4" dia. Drum Sander, 6" Dado Blades, Universal Hold Down Set, Customized solid-wood base, Material Extension, Support, Original Owners Guide $275.00 is this a good buy? I know little...
  19. Woodturning
    My lovely wife Sherri has some incredible friends. One of those friends just happens to be married to a professional and lifelong woodworker, Mark. Today, Sherri's friend asked if I'd be interested in purchasing Marks old lathe, as he ended up buying another larger one. If I wasn't interested in...
  20. Wood & Lumber
    Anyone have any tips on how to get my greedy hands on some decent wood for a reasonable price? I'm cranking out projects like crazy and just can't afford to be buying these expensive blanks :/. I have easy access to some mediocre oak and cedar, but I just loooove how some of the higher-end...
1-20 of 20 Results
Top