LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. I think I might be stuck on these for a while...

    I have been having a lot of fun with these turnings/carvings lately. The first vase is maple and bloodwood, the other two are maple, oak, walnut and cherry. They are finished with wipe on poly. I think next is to try it with a segmented turning. Should be fun, if it doesn't explode in my...
  2. Power Tools, Hardware and Accessories
    When depth stop on my TS75 is set to 0 the saw blade does not reach to the surface of the material by about 1.5 mm. This is without guide rail and with Festool stock blade (actually measured diameter is 209.5 mm). If this was the other way around (the blade reaches too deep) it could be adjusted...
  3. Power Tools, Hardware and Accessories
    I apologize in advance if this has been addressed, but would the Mafell KSP85Fc be considered the only saw close to the Festool TS 75 as far as power and cutting depth? Also, I understand that the Mafell surpasses the Festool in these last two categories but can it achieve the same results such...
1-3 of 3 Results
Top