Search Results for ‘feather’

This is a 3 inch oak wood feather. I used my pattern and glue spray to put on the wood I made for this feather. tools are drill press to drill a hole in the center. Scroll saw to cut out the center. band saw with 1/8th inch blade to get tight cuts done. white masking tape to help hold the...

I've been hanging on to that issue of Wood for years now, I always like the design. This year was the finally the time to make it. I had a particular board I wanted to resaw for the front. I wasn't too fond of the feet, so I left them off.

Meet Woody Woodfeathers, a part of the aRt BiRd flock at Oconee County Cultural Arts Foundation. He started out life as a fledgling Muslin aRt BiRd made by (ViVi) OCAF member volunteers for the arRtBiRd fundraiser. (See fifth picture) I took some ideas from the fan carving world and rived out...

A few months ago I got a new router and built my first router table. All was well until I made some rails for a cabinet. I had made a braced mdf top. The weight of the router caused a negligible sag in the center of the table. Negligible to the eye, but noticeable when I tried to put a piece of...

Big Leaf Maple plate that I turned for Christmas present. Had to re-turn it this week after a accidentally let it hop off my lathe and fly across the shop, leaving a few dents. Luckily I made it thick or it probably would have borken in half. Turned out better the next go round. There is one...

------------------------- This Hiking Stick was a commissioned piece, and so it has been "SOLD". Welcome Web Surfers: If you are surfing looking for a special walking cane on the internet, go toward the bottom of this posting where you'll find a list of canes that I have built that are ready...

This was a commissioned knife project, for something similar email me at: [email protected] - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Project Story I met a nice guy, now a good friend, who lives about 45 minutes from me. How we met is an interesting...

I made this bench yesterday to put outside an upstairs window so I can sit in the morning and look over the hay meadow. There is a window alcove at each end of the house, so I guess I'll have to make another bench for the other window soon. I've included a couple of photos that show the simple...

I made this for a gift for a family friends berfday. The feather is pyro'd (a Steve Good Pattern) It is made of Oak Ply 4/3" and Poplar. Thoughts/ suggestions/ opinions?

after our discussions of Wood Spirits and I discovered the face in the one piece of 2×4 I also found this piece of knot wood that had fallen out of a board. I thought the wood itself was beautiful and sat it on my workbench as an inspiration. I guess I was doing as Frank does, without knowing -...

Built on commission for a gentleman at our church who happens to be Native American. He asked for a box to hold his eagle feathers used during ceremonies with other tribal members. Made from aromatic red cedar to keep the moths away. Machine cut dovetails from my Porter Cable jig. The handle...