LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. Bowl

    This vessel is made of a solid cherry bottom, European Beech lower and upper, figured black walnut middle with a white hard maple upper with black walnut accents. Sanded 600 grit finish. Finish applied is a danish oil, with a clear gloss poly. In this pic only one coat of poly applied will...
  2. Tornado fund raiser donation

    Made this CB to help the Tornado fundraiser. The pattern kind of reflects the disarray that the tornado caused this area. It is made up of Black Walnut, Paduck, Shedua,Yellowheart,European Beech,Purpleheart,Marblewood, Santos Mahogany, Goncalo Alves,Bubinga,Bloodwood. I used salad bowl finish...
  3. Cutting Board donation

    Donating this Cutting Board to be auctioned off to raise money to help kids with reading difficulties. It is 12×12 x1-5/8 thk and made from Shedua, Hard Maple, Bubinga, European Beech, Macawood, Black Walnut, and Marblewood. I sealed it with Salad Bowl finish and finished it with mineral...
  4. Large Segmented Salad Bowl

    This bowl is large (by my shop's capabilities). It is about 9.5+" in diameter and almost 6" high. The diamond pattern in the feature layer is made of Satinwood in bookmatched Monterillo. The bookmatching doesn't show up too well in the pictures. The bowl is finished with Tung Oil and is food...
  5. Second church cb makeover

    This is the second cutting board I found at the church fair. I cut up the walnut and added european beech, hard maple, purpleheart, paduck, white oak and yellowheart to the aged walnut. I think it jazzed it up a bit.
  6. Cheeseboards

    I had some leftover wood from my last two CB's so I made two cheeseboards. The one on the left is made from Paduck, Black Walnut, Hard Maple, Yellowheart, Purpleheart, and Hickory. The handles are made from Purpleheart. It is 12 × 8×1-5/8 thk and sealed with salad bowl finish and finished with...
  7. A test cutting board

    I made this CB out of Hard Maple-Black Walnut-Paduck-European Beech-African Teak-Purpleheart. It is 12×18 x 1-3/8. I wanted to experiment with the final finish (mineral oil/beeswax), so I made this CB with various woods to see how they would be affected. I normally start finishing my CB with...
  8. A Few More Cutting Boards

    Cutting boards seem to be a popular project, so I thought I would try my hand at it. The boards are made from Black Walnut and European Beech. Thanks to degoose for his excellent blogs. Roger
  9. scroll saw table

    A few days ago?I got a new scroll saw.So?I decided to make a small table to be a base for it.It's made of European beech wood?finishing with wax oil?natural color.That hardware came from a part of Japanese furniture.
  10. Cheese Board=Apple Pie=Church Fair

    A neighbor came over and asked if I would make her a Cheese Board for a wedding present. I know she is on a fixed income so I went to my scrap box and made this Cheese Board with Black Walnut, Sugar Maple, Paduck, Cherry, Macawood, Flaked Oak, White Limba, European Beech, Santos Mahogany and...
  11. So many little pieces-so much patience

    We all accummulate that box of little leftover pieces of exotic wood and hate to toss them, because we may just need it someday. I decide to spend some time cutting and gluing up the leftovers, and this is what came out of it. There are 221 pieces total, 12 different exotic hardwoods. Black...
  12. Power Tools, Hardware and Accessories
    While perusing the Grizzly site I came across the 8.5" 1/2hp H0625 and 13", 3/4hp H0626 oscillating drill presses. I was wondering if any LJs have any experience with either of these lil' guys? I like the oscillating feature for sanding (I don't think I'd have enough use for a spindle sander...
  13. Power Tools, Hardware and Accessories
    You Gotta check out this tool !!!!!!!!!!!!!!! http://www.leevalley.com/en/wood/page.aspx?p=67335
1-13 of 13 Results
Top