LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 21 Results
  1. Hurricane Harvey Desk for Wife

    My wife is going back to school to get her masters in family and marriage counseling (I know…how lucky am I?). She wanted a new desk for her home office and instead of purchasing something from one of the big box stores, I decided to offer up my services and build her something she could call...
  2. "Aqueous" (Hybrid glow-in-the-dark Ornament)

    Hybrid glow-in-the-dark ornament made from epoxy resin & maple burl.
  3. "Abyss" (Hybrid Egg)

    Hybrid glow-in-the-dark egg made from resin & maple burl.
  4. "Isolation" (Hybrid Sphere)

    Hybrid sphere with stand made from epoxy resin & black walnut
  5. Custom Engraved and Epoxy Coated Cornhole Boards

    Made some custom cornhole boards for my mom and they turned out good i think? What do you guys think? I used some left over Thermory wall cladding from the inside of my shop build and then engraved the panel with the cnc and did an epoxy top coat. The full video and article are up and ill leave...
  6. Hexagon Coasters

    I've been wanting to incorporate epoxy resin to a project, so I figured epoxy coasters would be a good place to start. Wanting to add a little flare, I decided to make hexagon coasters, using a hexagon cutting jig I made a while back (you can see the hexagon jig video here). To make the...
  7. Walnut and Epoxy Hybrid Pool Cue

    Being an avid pool player and as i got better and better on my lathe I was approached about doing something that was on my to do list for a long time. A Pool Cue. I had been working on the plans and best way to make an epoxy hybrid pool cue for a long time. So I leaped at the opportunity to make...
  8. Wooden bathroom sink from Ash wood

    I like to push myself with doing something different from time to time, I've been wanting to make a wooden bathroom sink for some time but was not sure how to go about making one. Then one day it came to me how to make a wooden sink with the tools that I have in my workshop. I had a section of...
  9. Repaired Wooden Ball Blessing in disguise

    Today I show you the repair of the exploded ball from my video few weeks ago. To make something out of the pieces I taped the whole ball up and filled it with epoxy resin. 3 layers of resin was too much unfortunately, so it got some heat-cracks :(. Anyhow, I sanded it up to 500 than used my own...
  10. Pinecone Sphere

    Today I show you how I made an epoxy resin sphere. It's basically trapped pine cones inside of the epoxy, formed so it has a small stand. After it all hardened, I sanded it down to 500 grit. Afterwards i used my own sanding paste for the finish. I would be very happy to read your comment...
  11. Teardrop vase

    Today I show you a vase in drop shape from mountain ash. The cracks were filled with epoxy resin. When I cut off the vase, I miss calculated myself and stabbed too thinly, so the vase fall from the bench. Luckily, I was able to cut off the bottom again so that I could glue it in, exactly with...
  12. Olive Burl Slab Coffee Table with black epoxy resin

    Here's a coffee table I just finished. I bought this olive slab, which arrived sandwiched between 2 pieces of 1/4" plywood wrapped tightly with packing tape to keep all 6 pieces somewhat together. After gluing each piece together to make the slab one piece again, I started filling in all the...
  13. Wood Coasters with Epoxy Resin

    Just starting to learn how to work with epoxy resin and beginning to incorporate them into some simple woodworking projects. Here are some pictures of my first attempts with it. Lots to learn as always. These don't take too long too make and I think they are going to be great Christmas Presents!
  14. Chinese Checker Board

    I made a Chinese Checker Board that can hang on the wall while storing marbles in the board. It's made of Maple and Redheart. Check out the YouTube video if you want to see how I did it… I also provided a drill template for anyone that wants to make one themselves...
  15. "Fairy Log" Xmas present fun with epoxy and old rotted oak stump

    Video here! I got a fresh jug of epoxy! This is basically me playing with it and some pearl pigments usually used for automotive paints. Quite a while ago I grabbed this oak log from the family farm. It has been sitting out for years after it was cut up from some fallen limbs for firewood. I...
  16. Wood & Lumber
    I recently started messing around with woodworking and like most made some cutting boards. A couple end grain boards I made came out of the drum sander with tons of small cracks. I was taking really small passes with a new piece of 80 grit paper on there. I've read it might be too much heat...
  17. Wood & Lumber
    Hi guys and gals, first post here and I'm hoping for some advice, any is appreciated. So I've recently got my hand on so 8×8 oak beams at a price that can only be described as a steal, they started life as skids for military machinery but are in surprisingly good condition. My plan for them is...
  18. Woodworking Skill Share
    I have been messing around with very small scale epoxy inlays to get pouring, evacuating air bubbles, mixing dye, and calculating appropriate volume needed for the project. I've been working on an epoxy resin river table. I've read so many different articles on types of epoxy to use but don't...
  19. Woodworking Skill Share
    I'm working on a small keepsake box, and have been experimenting with doing an epoxy-filled inlay, but in a veneer, rather than the base wood. My main reason for doing this is because I lack the right tools to make an inlay in the wood itself, and I have a lot of nice veneers laying around. I...
1-20 of 21 Results
Top