Search Results for ‘entry table’

Hey, guys! I built a truss style sofa table with a reclaimed douglas fir top. The base is made from 2×4's and 4×4's except I ripped the edges off the 2×4's to square them up and make them look a lot better. The douglas fir came out of a house in East Nashville and is about 70 years old. You...

----------------------------- This piece is "not for sale", but I could build you something similar, but it will be a good sized investment. The wood is Quartersawn White Oak, the stain is Minwax Provincial, the finish is Deft Satin Lacquer. Dimensions? That's my secret. Email me at...

narrow tapered flitch of walnut used for the top of this hall/sofa table. top is elevated above the base . 48 long x 30 tall. walnut finished with odies oil

This little table (48" x 12") was commissioned by a client (also a friend) to sit in her entry way. We were originally going to go with a live-edge ash slab I had, but it wasn't working the way I wanted it to so I showed her a walnut slab I had on hand and she loved it. It's going to sit in her...

Entry or Side Table made from Gum wood. Joints were cut with the PantaRouter. Finish is General Finishes Armor-Seal on top of Seal-a-Cell. The design has gentle curves on the rails/stretchers that are mirrored on the top and shelves. It has a balance that I like, but is hard to photograph...

I was setting up at an art show a few weeks ago and I wanted to take something special. I had this piece of walnut sitting in my shop for a few years and decided it would look great squared off and filled with epoxy. Once I have the top made I decided I needed a base that really accentuated the...

Mid century modern style entry table with kumiko sliding doors. Finished with 3 coats of Minwax "Tung" oil and a coat of paste wax.

Dimensions: 40"L x 15"W x 36"H Materials: Wenge, Sepele & Cherry Wood The Elegant Hall Table features solid Sepele panels whose grain seems almost holographic when viewed from different angels. The panels are encased by solid cherry panel caps and solid cherry legs. The table top is framed by...

This is a piece I made for my home. We had this awkward space at the top of our entry way and wanted a table of sorts to hold keys and parking passes (so it needed a drawer), and of course hold the wife's purse (which determined the height of the lower shelf). It had to be thin enough not to...

I got this slab at auction for $20 with another slab off of the same tree. The other is not live edge, different part of the tree, and will make a fine matching coffee table. 1" square tubing metal base with the mesh shelf.

Here's an entry table #1 and I made a 2 months ago for an art show down here. It's all mesquite and turquoise inlay as usual. It took months to talk my buddy at the saw mill into selling me the top.

Bentwood Walnut Dining Table-Here is a table (or could be a desk I guess) that I have made in the past. I just never had it photographed or posted it.The table is made from walnut with purple heart breadboard ends. The base was created by bending the wood in a very large form using bending...

I am happy to present my first major project for opinions and critiques. I built this entirely out of heat treated pallet pinewood. The only power tools I had at the time were a handheld mitre saw, a sander and a drill. I was going to attempt a solid countertop but decided not to until I acquire...

sequence flitch sawn walnut planks were used to construct this cabinet. resawn and bookmatched white oak panel.

This is a entry table I built for our church to use as a place to offer bibles to visitors.The wood , poplar was donated by a local member. My return gift to him was a kindling box.

This is a maple Burl entry table that is made to match a coffee table I've also built. The legs are 2" thick walnut with a cherry stretcher. The stretcher is supported through the legs with a 3/4" aluminum bar and the front leg has a 25 degree rake to it. The legs are cut from the same piece of...

Entry Table made from Pecan for shelf and top and Poplar for the legs and rails. I used pocket screw jointery for the legs to the rails and shelf. The top is a marbled Pecan attached with figure 8's

This was a pretty simple personal project I recently completed for my home from maple, plywood and southern yellow pine. I knew the casework would be painted so I wanted to highlight the maple as much as possible. I selected a board with some figure in it and allowed the grain to run across the...

This charming table features roses cascading down the legs, and a simple glue, screw and cap method that enables even the novice woodworker to achieve great results. Simple instructions show you how to carve using a hand held rotary tool. She can be built in a weekend and last a lifetime. This...

This is an entry table I just made for my mom. I took her to the hardwood store and she picked out the woods used and was pretty excited. The Padauk was 6/4 and the Black Limba finished up 7/8. The Padauk was from a 10' x 11" board, so the grain is very similar to each board. The table...