LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

41-60 of 329 Results
  1. Entertainment Center

    A buddy's wife saw some of my furniture when they were over for dinner. I got the old 'if I pay you, will you build us a ….'. Well, of course, might pay for a few new toys in the toolbox. Entertainment center 80" long by 22"x22" - wiith upper barrister doors and lower slide drawers. The...
  2. New Entertainment Center

    Well, it's finished! Earlier this year, we had to replace our TV. It only made sense to get a flat screen model to replace the old CRT type. Mimi didn't like the old TV/stereo center (last picture). It didn't match the new furniture,was too hard to dust, etc, etc. The old center had also gone...
  3. Big Screen Entertainment Center

    Here is an entertainment center that I built a few years ago. It was made from poplar and finished by an artist who specializes in faux finishes.
  4. European Style Entertainment center

    Europien style entertainment center.(Built in Hungary)
  5. Scan Inspired TV Cabinet

    I got the inspiration from a cabinet I saw at Scan Design (last photo) and redesigned it to fit with the furniture we already have. Not sure what you would call the style maybe modern? It was made out of Sapele plywood for the case and solid sapele for the doors, draw and top I especially like...
  6. Extreme Living Room Makeover

    Finally got around to updating our living room. Before: After: Removed the existing entertainment center that the home builder built and replaced with new one. Floor to ceiling, beaded face frames, full inset drawers and doors, dovetails, divided light glass...
  7. Corner Entertainment Center

    I built this entertainment center to fit perfectly in the corner at my old house. The two sides against the wall don't actually meet, but instead there's a diagonal back that leaves a triangular space behind it. The top, shelves, sides, and back are all cabinet plywood with a strip of veneer...
  8. Entertainment credenza

    This is another project I made a few years ago after buying a new flat screen TV. The old style entertainment armoires don't work for these new TVs and I wanted something a bit more sleek and contemporary to match my changing tastes. It is made of maple veneered plywood and solid cherry for...
  9. Barnwood Entertainment Center

    Entertainment center constructed of barn wood - fir I believe - obtained from a Montana neighbor of ours who has a number of very old barns on their property. The center panel is rusty corrugated steel from the same neighbor. Side panels are hand cut mortise-and-tenon but I also used simpler...
  10. Smithsonian TV Stand | Custom

    This is the last of the three projects for this customer. It is a simple TV stand with doors. I matched the raised panel doors and base "molding"http://www.wwbeds.com/moldings to the rest of the pieces. For more building pictures see my Current Projects link at wwbeds.com or poggyskids.com.
  11. Entertainment Center

    So after months and months of deliberating back and forth about whether to buy a new TV, my wife & I finally decided to pull the trigger and purchase a 55" flat screen TV with a stand. With that being said, new purchases for a woodworker usually means a legitimate reason to build something to...
  12. Floating entertainment center with tambour doors

    We needed a new entertainment center, and we decided we liked the idea of a floating stand. My significant other was really into tambour doors. I'd never done them before. They are hard to get right! I took my time-really wanted them to slide easy, but have enough friction to stay...
  13. V I K I N G S

    V I K I N G S Double Dogs in American Cherry by BazzA. Someone asked me to make this from a Photo. I dont have any info except its of Viking origin. Hope someone here can tell us a little about the image. Great learning curve ! really enjoy having ago . one inch thick Cherry 13 inch wide...
  14. Built in Entertainment Center

    The wife and I wanted a place to organize our books and other media. I built the entertainment center out of veneered plywood and poplar. All my joins are pocket holed with a Porter Cable Quick Jig. I made the flat panel doors with poplar and 1/4'' ply. My wife did most of the finishing and...
  15. Oak entertainment center

    Made this entertainment center of a friend a few years ago. She had a picture of what she liked and some specific dimentions. Took me about 6 weekends to make it. It is six pieses and has touch lighting. The Oak is it's natural color. I just put a conditioner and a clearcoat on it.
  16. Ecenter

    This is an Ecenter I built for my daughter in 2009. The year before I had built the same design for my son, except we used drawers in the center section of his unit. I got the plan from AMERICAN WOODWORKER magazine. I used solid oak for the top, door frames, and faced out oak plywood for the...
  17. Pine Entertainment Center

    Last year I got tired of having my plasma sitting precariously on a stool and my A/V equipment stacked on the floor. This was my own design built from clear pine from Home Depot. I built this using only a circular saw, a router, a hand saw, and a few sanders, and I built it (unwisely) on the...
  18. vase in spalted catahua wood

    this is the last of the lot of wood (the other two sold out) this is 5×9" clear laquer
  19. Barn Door Console Table

    I just published my first blog post here on Lumberjocks. Go check it out and let me know what you think. For those of you that prefer just seeing the pictures I figured I would just post those here. Thanks for looking! -Jacob - Timber & Ash Designs
41-60 of 329 Results
Top