LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-14 of 14 Results
  1. Fancy Wood Cane #027: Quilted Maple & Claro Black Walnut

    This is one of my favorites. I found some really nice quilted maple and decided it needed to be a 3 Dimensional piece to show off the illumination. This was one time the wood really spoke out to me and insisted that it had more potential than as a flat surfaced object. One can spend hours...
  2. Elegant Hall Table

    Constructed from a local Marri tree this table was intended to be elegant and modern. With a beautiful book-matched top and highly figured legs I feel the table gives the viewer a sense of depth when looking at it up close. Timber: Marri (red gum) Finish: Blend of Beeswax and Orange oil...
  3. Walnut Table...Rust-egant?? Ele-rustic??

    This is a table I came up with when a buddy gave me some end-grain slabs of black walnut from a downed tree on his property. The only thing I could think to do with them was use them for table tops. This table uses the first of two pieces I received. The belt sander didn't work too well (even...
  4. Modern Grandfather Clock

    This clock is made from reclaimed Long Leaf Heart Pine . It is constructed from approximately 100 bf of wood with solid steel, salvaged casters. A rich crimson, cabernet finish is applied to this exclusive & beautifully designed piece. For the back of this piece, contrasting colors are applied...
  5. Walnut Table w/dogwood branch inlays

    I designed and built this dining room table for clients who had a very large informal dining room and like to have large but casual dinner parties. The Claro Walnut top is a sequentially book matched set with some beautiful figure and is accented with black poplar for an ebony look. (I have a...
  6. End grain island top

    This a 3.5 inch thick x 5 feet long x 26 inch wide African mahogany island countertop I just finished with food grade mineral oil. This guy is somewhere around 130-150 lbs.
  7. Tall Fancy Cane #090: Extra Fancy Amboyna, Brazilian Ebony, Manzanita & Padauk

    This is a tall cane that has an extra long but still somewhat slender handle for a more tailored appearance. The handle made of solid extra fancy Amboyna which as a beautiful grain of light and dark swirls consistently throughout the piece. It is approximately 6" Long x 1.5" Tall x 1.25" Wide...
  8. Curly Koa & Ebony Cane

    This cane handle is made from a nice piece of Curly Koa and I wanted to mimic the traditional hound's head cane that were once very popular. I've seen some elegant ones carved from ivory and some real doggy dog head ones carved from whoknowswhat, so my challenge was to create a cane that looked...
  9. Bookcases

    Copper side panels. Alder and Walnut woods. Identical dimensions. Different accents. Peace on Earth, Bruce
  10. Custom Dress Walking Canes; Walnut Octagonal Straight Shafts w/other Material Combinations Shown

    ------------------------------------- This matching set of walnut walking canes were commissioned, and have been sold. sequential Serial Numbers #2008-31 & 2008-32 Height: 36.5" This cane has been "SOLD". Welcome Surfers: If you are surfing looking for a special walking cane on the internet...
  11. Rememberance Plaques

    These two plaques were supposed to be completed in time to give to both my father and father-in-law before my wedding…well here we are a year and a half later! Oh well, at least they got them! The first plaque is made with curly maple and purple heart inlay. It is to commemorate my...
  12. Power Tools, Hardware and Accessories
    I just purchased a Craftsman 22124 10" Tablesaw and have it setup with one outstanding problem. I can't seem to get the blade to lay flat against the arbor flange. It seems like the sawblade hole is too small. I can fit the blade over the arbor threads and I can push it back to within about...
  13. Woodturning
    Hey guys. I'm a little new to turning. I'm wanting to turn something special for a special lady who is about to deliver her first child. It obviously needs to be something safe for baby, but also something that can be handed down through the years. Any suggestions?
  14. Woodcarving
    My daughter loves anything Minion related. A minion is basically a twinkie in overalls that does it's master's bidding… They're featured in Disney Pixar's "Despicable Me" for those of you who didn't know. I am EXTREMELY new to this hobby, so I was very proud to have finally produced something...
1-14 of 14 Results
Top