LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 500 Results
  1. Underwater World

    Hello all, it's been awhile since I posted a project because of my broken hand and then playing catch up to get some projects done. This one took AWHILE to finish because it was 341 pieces and a lot of them where very small. I spent a lot of time down on my hands and knees looking for a piece...
  2. Nautical Style Submarine Door

    This is a submarine door all made from recycled lumber. It is grafted into a standard door which is the door to my office at work. I made this all at home in my shop and installed it into my existing office door at work on the weekend. It has been up for almost a year and people still stop to...
  3. Bentwood Ring (Ebony)

    This particular project is a ring made from a single strip of exotic Ebony using the bentwood method, without the use of power tools of any kind. It was then hand-sanded and finished with multiple coats of a polymerized linseed oil and beeswax mix that provides durability while maintaining its...
  4. 2012 Mallet Swap Entry for Bertha

    I was very excited to find out about the mallet swap for this Christmas. 22 guys making mallets and then swapping them Chinese Christmas-style was just too good of an idea. Part of me was intimidated, not so much because I didn't have confidence to produce something worthy of a fellow...
  5. Find a Home for an Intarsia Carousel Horse Wall Hanging

    I really had some fun making this piece and it was a real challenge. I saw a picture on the internet and made a pattern based on that with Inkskape. It ended up having 190 different pieces with 13 different kinds of woods. The pole was a real challenge to make out of a block of yellow heart...
  6. Bookmarks

    Trying to use up a few scraps, I made a couple bookmarks. One is black walnut with wenge and the other is cherry and bloodwood. The purpose of the slots in the cherry one was so it could slip over a page like a paperclip. However, in hindsight, I would make the grooves wider next time to...
  7. Cerajiera Crotch and Mahogany Side Table

    This was a little side table that I made for beside a couch in my home. It was my first real crack at bent lamination and inlay into the legs. The wood is African-Cerejiera crotch veneer and Honduran mahogany the inlay was done with Ebony. Challenging project that I'm pretty proud of.
  8. Empire table

    Couple months ago we delivered this Empire diner room table. Our clients loves empire and asked us to create a dining room table inspired by an italian empire library table. The top was made from solid mahogany Patrick Edwards bought in 72 or 74, I can't remember. The marquetry for the...
  9. Maple, ebony, & brushed stainless steel table

    I made and designed this piece for some good friends of mine that just finished building a modern 6 story home looking over Seattle's lake Union. I chose to use maple as the primary wood in order to match the maple butcher block counter tops in their kitchen and ebonized maple legs & arched...
  10. Enzo Mari, Model 1123XD Table

    ... ... ... In 1974, the now noted Italian architect and designer Enzo Mari published a small book of furniture designs, some 19 pieces in all, and gave it away for free - to anyone around the world - just by sending him a S.S.A.E. The pamphlet was titled "Proposta per un'autoprogettazione"...
  11. Paduak, Maple and Ebony Drink Coaster Set

    We had no nice coasters for our drinks, and the wife's birthday was coming up, so….. The caddy is quarter-sawn Paduak, trimmed with ebony; the coaster bottom is maple, as is the caddy's bottom.
  12. Middle Earth Battlefield

    My brother got me these really cool chess pieces based on the characters of JRR Tolkiens Lord of the Rings. So of course I had to make a chess board worthy of the pieces. Made of ebony and curly maple on a red oak substrate. The bottom has felt glued to it. It also folds in half to be in a case...
  13. Extra Large Mens Fancy Cane #058: Manzanita Burl, Ebony & Osage Orange

    This is an extra large handle measuring 8.5" long and approximately 1.25" thick at the thinnest diameter. The handle is made from extremely fine quality of Manzanita Burl that is very dense and has a beautiful swirl of grain. This burl is much superior to the previous Manzanita I have used as...
  14. Monterey Cypress Tree Mirror

    ---------------------------------------------------- FOR MORE INFORMATION PLEASE VISIT MY WEBSITE: blakeweber.us ---------------------------------------------------- Padauk with Ebony plugs and mirror glass. Finished with Boiled Linseed Oil. The back panel is removable for cleaning the glass...
  15. Asian and Greene and Greene inspired hall table

    I've been fairly active in the online woodworking community for a while but have never really produced anything I would classify as furniture. I began working on this table about 7 months ago but got sidetracked with a priority shift of renovating 6 rooms in our house. And the standard trying to...
  16. The Lady

    A work entitled "The Lady". A single drawer, bandsawn box. The timber is Australian Red Cedar. Finished in pure Tung Oil, fine sanded to 1500 wet & dry. Fun to make. Tony Ward
  17. sun ray floor

    Red oak floor stained Ebony with aluminum accent strips between each piece and wenge for the center. This is a floor that we installed and sanded over a year ago (before I was a member of lumberjocks) and its the only photo I can find at the time. If I find more pictures I'll be sure to add them...
  18. For a Friend

    Here's a picture frame project I made for a friend when his father passed away last fall. The frame is black walnut and maple with ebony splines. The frames contents is a copy of the lyrics to a Reba Mcentire song entitled "The Greatest Man I Never Knew".
  19. Ebony plinth for "Winter Mage"

    This is a plinth I made for my friend, Laszlo, for his entry into '06 Kublacon mini-painting competition. He placed third in the Fantasy Single category. The base is made of Gabon Ebony with some nice striped grain patterns .
  20. Bandsaw Box

    I've wanted to try my hand at making a bandsaw box for a few years especially since I got a new Grizzly bandsaw last Christmas. Well I finally got around to it. Here is my first box. Oak, padauk, maple burl, and an ebony handle. What fun. Thanks for looking.
1-20 of 500 Results
Top