LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 11 Results
  1. Charging station & drill storage

    Locked and loaded…French cleat holsters are done for the drills. I like them facing out, loaded with the different bits I use most. Initially my plan was to hang them from the battery ends … but I tend to be clumsy, and will be using the narrow shelf below, to stack stock to cut at the mitre...
  2. Drill Storage Cabinet

    First project off of the new bench is downright handy but…not quite so sexy. For the longest time I have nowhere to store my drill and impact driver. They'd roll laround on various surfaces, the floor, etc.. I also had no convenient place for my charger, which led to a lot of time spent waiting...
  3. Power Tools (Drill, Driver, Jigsaw, Oscillating, Circ) + Accessories & Charging Rack

    Here is the Hand Power Tools & Accessories rack that I built to hang on my french cleat wall. It holds my Drill, Driver, Jigsaw, Oscillating Tool, 4-1/2" Circular Saw and most of the various accessories that go with these tools (at least the ones that get used often). The chargers are mounted...
  4. Drill charging station

    Needed an upgraded version of my old charging station that was built, based on the popular plans found here at hertoolbelt.com. I have since outgrown the old one. This one is 32" wide, 36" tall, 12" deep. Will hold 8 drills and/or air guns I will be making/reusing some bit holders that will...
  5. Drill/Driver Hanging Station (possible charging station)

    Drill/Driver Hanging Station I filmed the build on my YouTube Channel. Please check it out! My old unit served me well, but I could incorporate some storage and increase the quality a little bit. The build consists of MDF, 3" PVC Pipe, Glue, Pocket screws, paint. Primary construction...
  6. Cordless Drill Charging Station

    I was sick and tired of not being able to find my cordless drills and having their accessories and chargers strewn all about the shop. So I searched around for some good ideas (many of which I saw from LumberJocks) and incorporated a lot of different ideas into my finished product. I took a...
  7. Drill Storage / Charging Station

    My dad was in town this week and bought me one of those fancy lithium-ion battery powered drills. I put it in a diaper box along with another battery charger for my weed-eater. Having young kids, I'm a proponent of the diaper box storage system (I store all my cut-offs in diaper boxes)...
  8. Cordless Tool Charging Station

    It's a very basic free standing unit it's put together with rabbits and dado to connect the shelves and back board pieces 1. It's made from 3/4" sanded plywood, I got this entire project out 3/4 of a sheet. 2. The overall dimensions are 30" high x 30" wide x 10" deep. 3. The sides are dado to...
  9. Woodworking Skill Share
    I have been asked to make an end grain cutting board that will have a circle in the center about 4-6 inches in diameter. Think of the Japanese flag. The circle will be a different wood than the surrounding wood meaning that there will be some difference in the seasonal movement of the 2 woods...
  10. Designing Woodworking Projects
    Hi All, Im hoping you can send my some sawdust wisdom on a little project ive been asked to consider. There is a company called Muji that create little wooden stylized versions of iconic buildings which they sell as kids toys. A company here in Europe have asked if it can be done cheaply for EU...
  11. Off Topic Coffee Lounge
    why doesn't the post show as OT: {Title} Why does the title get hidden? If it were just OT: TITLE we would know whether we want to even view it. Rather than waste cpu cycles on the web server. Anyone else want to see the title?
1-11 of 11 Results
Top