LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 106 Results
  1. Drill Press Station - Table/Lift/Fence/Vise/Drum Sander

    Drill Press Station - Table/Lift/Fence/Vise/Drum Sander My drill press is a small inexpensive bench top type, and until I get a good floor type one I am trying to get the best out of it. One of the first things I did was to change its old pole with a stainless steel one. Why stainless steel...
  2. Drill press table

    My version of a useful accessory for your DP. Just a couple pieces of plywood glued together, with some T-track set into it. There is a sacrificial 4" x 4" square of plywood in the middle to make tearout a thing of the past. I've found it very handy and I don't know why more manufacturers...
  3. Drill press table

    I made a drill press table using 2 pcs. of 1/2" plywood scrap, t track, and a rockler router fence I got for ten dollars. It is 19" X 31 1/2".
  4. First Project...Another Drill Press Table

    Well this is my first real project in the new shop. Still in the process of placing/purchasing tools. Just bought this Jet benchtop drill press a couple weeks ago. I'll review the dp later on after I've had more time with it. Didn't like that it had no holes in the table so I had to drill my...
  5. Update for my old 1944 Walker/Turner drill press

    I have finally out grown the small Harbor Freight drill press table I have been using for the last 3 1/2 years. The T-tracks had pulled out due to only having #6-3/8 flat head screws keeping them in. And the MDF was splitting in the middle too. Here is what it looked like...
  6. Drill Press Table

    I built this drill press table about a year ago. It is made of laminated MDF with a solid maple edge. The fence and hold downs ride in t-slots in the table. These slots frequently become clogged with dust, which is pretty annoying. Another annoying aspect of the design is that the drill...
  7. Drill Press Table

    I made this table for my drill press. I used 1-⅛" melamine because of it's smooth flat surface. The center waste block I cut square and positioned it off center so I could turn it and flip it for more uses. I used cam action clamps through the fence. Knobs would have extended past the face of...
  8. My drill press table

    Hello This week I decide to make my drill press table. It's very classical but I like it. The stop block is maintened with a clamp. I haven't got enough track The martyr is not centred. It's square and like this I can turn around it to the four angles and use it a maximum But now I don't...
  9. Drill press hold-down clamp

    I just finished up on my drill press table http://lumberjocks.com/projects/79676 and thought I would make some accessories for it. This hold-down clamp is easy to build, and fits in any T-track. You can use it on other tools like you table saw, or even on a table saw sled. It has a threaded...
  10. Router Table with a Side Project

    There were two pieces of equipment in my shop that I would hesitate to utilize because of the inconvenience they presented. One was my table based router. It was mounted in an Incra top with an Incra plate and Incra fence. All nice. However that was mounted to a B&D Workmate 425. It was...
  11. Drill press table with dust collection

    Drill press table based on Shop Notes #94. The tracks was made with hard wood, we don't have aluminum t-track available here. Great design, for clamping pieces, nice dust collection and solid double layer MDF platform. I also made some additional inserts depend on drilling/sanding job.
  12. Drill Press Table

    So your dimensions may be a little different. The result have been a table/fence that fits good and works good. Here's what you'll need: 24" X 16" X 3/4" plywood 16" X 1" X 1/2" plywood T-Track Kit 4' T-Track Kit Mark the center of the table on the back 16" side. Mark 1" in and drill a 2"...
  13. Drill Press Table

    Well, I finally finished my drill press table. It made of a sandwich of two layers of 3/4" MDF with one layer of hardboard for the top, the edging is Douglas fir, and the inserts are 1/2" MDF. There are two more layers of 3/4" MDF between the table top and the stock drill press table to allow...
  14. My Drill Press table

    This is my drill press table I have made. I have stolen many ideas from many of you that have posted tables here. It is however a pretty basic table. I do have to say the center insert is by far the best design I have incorporated into this table. I can rotate it four times on one side to give...
  15. Built a bigger and better "Drill Press Table."

    I was browsing through Lumberjocks.com and I have noticed soo many great projects people have been building! and I happen to be a big fan of home built jigs, tables, and equipment. So I figured why not start my first Lumberjocks.com project with a much needed new table for my drill press! -...
  16. I redesigned my drill press table fence.

    I was having troubles with the previous fence i built for my drill press table so i went back to the drawing board and came up with this guy, much happier! The flip stop is made from aluminum on my hobby CNC mill. More info in the video: //www.youtube.com/v/I-mZPWXhdc4 ?version=3&hl=en_US&rel=0
  17. Height-Adjustable Drill Press Table

    Well, I finally completed three upgrades to my drill press - a mobile base, a set of storage cabinets, and a pretty cool, height adjustable top. I've never posted anything on Lumberjocks before, so I thought this might be a good time! This post is mainly about the top (I'll try not to ramble on...
  18. Mount a Woodpeck Drill Press table onto Porter Cable Drill Press

    Hi everyone. Thanks for visiting my 1st posted project. I have gained so much knowledge on this board, I figured it was about time to contribute. I recently purchased a Woodpeck Drill press table for my Porter Cable Floor Standing Drill Press. Since the table that comes with the Drill Press...
  19. Drill Press Table

    As I blogged, I built myself a drill press table. Mostly MDF, Laminate, lots of T-Track, and some Sipo banding to fancy it up.
  20. Drill Press Station

    I have had all my drill press accessories spread all over my shop for a while now, and I decided to build a cabinet for storage underneath the table of my floor standing drill press. The cabinet is constructed of 3/4" Radiata pine ply from big orange. Btw, I think that particular product is the...
1-20 of 106 Results
Top