Search Results for ‘drawer slide’

My first natural edge bowl. Definitely my best work so far! All questions and comments are welcome. Enjoy!

My wife wanted an end table to keep next to the computer to hold receipts and other financial paperwork. This is constructed out of 3/4" baltic birch plywood with edge banding. The drawer is 1/2" baltic birch with a routed path for the hardwood runner mounted inside the cabinet. Everything is...

The Midland County Salvation Army Emergency Communications Vehicle is basically a camper fitted with radios and antennas for emergency communications. The communications vehicle is outfitted by the Midland Amateur Radio Club, another of my too many hobbies. So they asked if I could come up...

A blast from the (recent) past. Back in 2000/01, when I was out of work and thought there might be a bit of money to be made in it, I made this writing slope. Under the Rosewood and Bird's Eye Maple veneer beats a heart of solid MDF (its an excellent veneer substrate, being flat and stable). The...

I recently built a new miter saw station out of 2×4s. I left the bottoms open with the intention of adding different storage options underneath and I just finished the first step: building a set of simple drawers under the drill press module so I can store all my bits and various accessories. I...

hi fellow LJ here is another segment bowl that i had a lot of fun making the timber i used is purple hart beech Chery wenge bubinga it is 14 inch by 7 inches the are 330 pieces all comments and question es are welcome branch

I made these tables using 2×4's, 1×4's, and 4×4's and finished with walnut colored stain and an off white paint for the legs. I also made an end table to match, but I am unable to locate the pictures at this time I based my plans off a design by Ana White from Ana-White.com

I designed a quick action lever router lift for my shop. The lift slides extremely easy with steel bar slides. It's quickly locked into place and unlocked for lowering. A stop block is incorporated so you can quickly and easily return to your previous position if you need to use the top surface...

I recently had a project that required many drawer slides. I was on a tight time constraint so I wanted to buy and use the Kreg Magnetic Drawer Slide Mounting Tools (link). Unfortunately, they seem to be discontinued. The only one I could find was on ebay for $150! So, I made my own from some...

24" tall made of cherry. Danish oil and gloss finish. Made to hang on the wall with keyhole slot.

With over 12" of snow yesterday, my woodworking is done for the year! I did manage to squeak one more in though. This project was entirely of reclaimed wood from the dismantled loft bed project. All the wood is dimensional pine construction lumber, nominal 2×6. In all, there were two pieces...

I made 6 of these bowl for '07 Christmas presents. Cherry with walnut accent stripes. I saw plan for routed bowls in one of the popular magazines and my wife kind of liked the looks of the round ones but said that they had to be deeper. I said ok, but i didn't like the way the plans were as...