LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 500 Results
  1. Projects Simple chisel rack

    A simple chisel rack to hang on the wall. It utilizes magnets to hold the chisels in place. Hand cut dovetails.
  2. Projects Hallway Bench

    Piece #3 - Built this hallway bench to give the kids a place to take their shoes off and on. Finished in Natura Onecoat - Clear. Thanks for looking.
  3. Projects Router Table

    Base is 36" w X 24" d X 36" h and the top is 39.5" w X 26" d Top is 2 laminated sheets of 3/4" MDF with 2 coats of thinned Titebond 3 and 3 coats of shellac. I added storage to one small drawer for lift tools. The other small drawers are for bit storage. Bit storage is 1/2" ply with 1/4" and...
  4. Projects Reclaimed Cedar Blanket Chest

    So a couple of years ago I completed a deck replacement at my house, and when I removed the old (painted red) decking, handrails, fascia, etc., I realized they were all cedar. I saved a couple of pieces, planed them all down and went to work. The result was this Blanket Chest with Antique Handles.
  5. Journal Replacement Chest of Drawers

    Time to start on building 4 drawers....need 4 blanks for the drawer fronts... I need one edge to be jointed... once I have all 4 blanks jointed.. And THAT edge marked with a J to keep track of them...I can place that edge against the mitre gauge on the tablesaw...square one end...measure for...
  6. Solid Cherry Wine Rack

    This solid cherry wine rack was made for a friend for her birthday. The rack features hand cut dovetails for all of the joinery except for the back panel. The finish is just boiled linseed oil and 4 coats of a satin wipe on poly (my own recipe).
  7. Dovetail and Carved Candle Box

    So I made a box for my wife a while back and everyone kept asking how I made it so I thought I would make a second one slightly differently and show what all went into making this small Dovetailed Candle Box. Here is the full Build video on this box!
  8. Laundry Caddy for Mom

    My mother asked me to build a laundry basket caddy for her, that would allow her to stack 2 baskets with minimal foot print. It has a cherry frame with wainscoting panels and formica laminated on top. The baskets slide in and out on cleats. I added the drawer for a surprise feature. I had...
  9. Bent Wrench

    This was made from some extra oak and poplar I had laying around. It has sat in my shop unfinished without a perch. This weekend I finally decided finished it. Bent an old wrench with a little heat. Welded a bolt to the back. Slapped on some poly for the weather. I'm calling it finished.
  10. Mail And Desktop Organiser

    I made a mail organizer last year and I felt like it didn't showcase my best work and it was painted a horrific color so I decided to remake it. I decided to use my new porter cable dovetail jig to make the case and drawer to kind of get some practice in making machine cut dovetails and I...
  11. Dovetailed Box

    This is a simple dovetailed box a made a few weeks ago as a thank you gift for some friends. I think they make great gifts and are a good way to keep up your dovetailing skills from getting rusty. The box is cherry with purple heart accents finished with shellac. Unfortunately when i was done...
  12. Tool Tray

    This little tray keeps all the dovetail essentials together and organized. It sits on the tool wall with a french cleat, allowing me to easily bring the whole tray to the bench. Pretty handy:) Video how i made it: //www.youtube.com/v/nGcYr_Y3ySQ ?version=3&hl=en_US&rel=0
  13. Four Drawer File Cabinet in cherry

    I made this Cherry four drawer filing cabinet to replace the crappy metal one that I am happily throwing out. This cabinet is solid Cherry, with Maple drawers and Mahogany drawer fronts. The case and drawers are all dovetailed, and the drawer bottoms and cabinet back are all tongue & groove Oak...
  14. Rockford Box in Dovetailed Sapele with Swiss Pear top.

    This box is titled Rockford for Rockford, Illinois and is made from dovetailed Sapele with an inlaid Swiss Pear top. A fitted leather lining and brass hinges complete the box. Size: 6' deep x 8" wide x 4" high
  15. Maple Mortise Madness

    120 mortise and tennons, 12 dovetails, a lot of biscuits, a few dowels and there you have it! Two end tables and a couch table made of maple finished with three coats of 35 sheen lacquer. The only mechanical fasteners used are for the undermount soft close slides for the drawer. One end table...
  16. Cherry Shaker Style Bookcase

    My first lumberjocks project. This case is pictured with the final coat(hopefully) of poly. It took a little over a month to complete and that was working everyday in the morning for a few hours before work at 2 pm. This is also my first comissioned piece. I guess i could be considered a pro now...
  17. Spice rack with copper dividers

    After I finished the stereo stand my girlfriend asked me to make a spice rack for the kitchen. The one we had was too small, and she wasn't thrilled with the style. The sides are maple, the shelves are aromatic Spanish cedar, and the back is 1/4" baltic birch. She wanted some sort of dividers...
  18. My First Box, Walnut & Curly Ambrosia Maple

    This is my first ever box that I have made. My wife is an Emergency Department Nurse and she had me make this for her preceptor that she shadowed during her orientation period after being hired by the hospital. It's made from walnut and curly ambrosia maple and features dovetail joinery. It...
  19. First inlaid dove tail box.

    This is my first attempt at this, I should have practice in scrap since I made a lot of mistakes and it took me a couple hrs to do, but the wood was mostly left over scraps from other projects. Curly maple, walnut base and left over 5/16th Santos Mahogany from a flooring project. U used a...
  20. Dovetailed Cherry Cabinet

    This small wall cabinet was built of cherry and features a turned walnut knob, frame-and-panel door pinned with walnut dowels, and a dovetailed drawer and case. For a finish, two sealer coats of clear shellac were applied, then lightly sanded. Next, four coats of Minwax antique oil were applied...
1-20 of 500 Results
Top