LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 265 Results
  1. Pantry Door

    Latest project. One piece carved raised panels on Shopbot buddy , the one piece grilled panel is one of many possible variations that helped launch a whole new line of doors. All Spanish cedar, poly-oil and wax finish.
  2. Woodcarving: Very low relief 1/8 deep carving and Antique Doors.

    In September of 2012 I was commissioned to carve on antique mahogany doors from big old house in Pennsylvania. House about 10000 sq. f. Age of those doors 100 years. from 1911. Doors were not solid mahogany they had only 1/8" panels on top of pine raised panel. So my WOODCARVING has to by only...
  3. Patio Cover

    This patio cover was added to a back yard as a transition from the indoor living spaces to the backyard areas and pool. The roof was framed so that the soffit, fascia and gutters tied in with the existing house. The posts and beams where trimmed with cedar and painted white. The ceiling is...
  4. oak and walnut kitchen with shaker style doors

    The doors are made out of white oak with mdf veneered panels. The worktop is black walnut and some of it has also been used to add interest to the tall cupboard end panels. Black walnut was also used for the draw fronts. The washing machine, dishwasher, tumbler dryer, fridge and freezer are...
  5. more colaboration , MARGY'S FAMOUS DOORS #1

    my good friend margy , http://lumberjocks.com/margy has a hard time using her new computer ,and posting pictures . so with her permission and hopefully with martins , i want to show her work ! the art is entirely her own , with a few nudges from me , and some clients wishes . i make the frames...
  6. Barbeque Center Cabinet Doors

    A Friend of mine needed some doors for his new brick barbeque area. Made frames from redwood, glued up he door frames laminated a plywood back on and hung the little doors with butt hinges so as little of the hinge showing possible.
  7. Bathroom

    This is our master bath. Built in 1980. The tongue and groove paneling is made from Aspen. The rest of the woodwork is Pine. All of our house is a custom blend stain with a lacquer finish. Sure is nice to own a raised panel door shop. The shutters are lattice with fabric inserts behind.
  8. Japanese Shoji doors

    Japanese Shoji doors I built for the spa room in a 27k sq ft house. First time trying something like this.
  9. Simple Medicine Cabinet

    Our powder room had no medicine cabinet, and we needed something to keep things out of the reach of the kids, so I made this simple medicine cabinet. It's red oak with birds eye maple door panels. there are through tenons on the top and bottom. Two doors with mortise and tenon joints, the...
  10. Log Cabin staircase

    The stairs to the loft were an afterthought in the design of this cabin. The original plan called for a ladder, but after the owner tried using it, they realized that what looks good on paper wasn't practical for their use. With only a few minor exceptions, all the lumber for this is left over...
  11. Dual Miter Saw Workbench w/DC

    So I realized that I never got to post this as a project, and figured I would finally add it. Part of me was waiting for the day that I got to add drawers, but, as life sometimes goes I haven't had the chance to build the drawers yet. So anyways, here it is! This was built for our high school...
  12. Arts and crafts style curio cabinet my wife uses for her angel collection.

    I made this cabinet a little while ago. It is in the style of the arts and crafts movement and I had beveled glass installed in the doors.
  13. Bailey's Contempo Murphy Bed | Custom

    This is a bed that was completed in January 2010. This is a relatively new style, buy have built quite a few in the last couple months. It is a real simple murphy bed that has clean lines. The bookcases that I put with these are normally the same height as the bed. Normally I make the...
  14. Contemporary Reclaimed Barn Wood Sliding Door

    Here's a recent build I did using different barn woods from our lot. The customer picked out all of the different pieces at the lot and then I ripped them, jointed the back side, and brad-nailed/adhered them to the birch plywood. when it was fully assembled, our finish guy did a great lacquer...
  15. Cutting Board Christmas Special

    This Christmas I made over 20 cutting boards for gifts. Most had to be sent before Christmas and before I had a chance to photograph the rest. Here is an array of some of the different designs. The woods used were Maple, Cherry and Walnut. The finish was food grade oil finish. The routed...
  16. Murphy Bed (Ross with Bookcases) | Custom

    This is a murphy bed that was completed on September 15, 2009. It features our Ross style with 18" bookcase. The book case has 3 drawers on the lower section and adjustable shelves on the top. The finish shown here is Colonial Maple from Minwax (see colors). For more information and...
  17. Solarium She Shed & Dancing Deck

    https://www.instructables.com/id/Solarium-She-Shed-Dancing-Deck/ Solarium She Shed I wanted to create a space in my front garden area that I could enjoy all four seasons(I live in the the Northeast US). She Sheds have become popular recently so I thought I'd make one for myself. This is my...
  18. jatoba custom doors

    doors I made out of 4/4 jatoba, started with rough stock run thru molder then used patterns made of 1/4 mdf screwed to back of stock that was free hand sawn oversize on band saw then run on shaper free hand. then run thru widebelt to 150 grit then used pl 400 glue to substrate then stapled on...
  19. Smithsonian Corner Bookcase | Custom

    This was a bookcase that was designed to match the Smithsonian Murphy Bed and Two Desk project. It features a longer bookcase that is goes all the way in the corner and a smaller one that mounts to it. It was completed in October 2011 and built using Maple wood. The finish was a dye...
  20. Redwood Shop Doors

    Back Story I knew I would not be satisfied with a store bought garage door, so I took many walks around the neighborhood checking out old garage doors. I drew up a plan for these, and bought a huge load of clear redwood. The 8" jointer was acquired during the course of this project. I made these...
1-20 of 265 Results
Top