LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 18 Results
  1. Dog bed. Or shall I say "Rat bed"

    Even the family rat gets a new bed.
  2. Shipping Crate Dog Bed

    For my dog Stanley's 2nd birthday, I built a shipping crate themed dog bed. A step folds out so he can get up into the bed. I put carpet on the step and on the surface where his dog bed will lay. I used 3/4" birch plywood and cheap pine for the trim. I left it rough (like shipping crates...
  3. Dog Bed

    Same dog bed just cut the legs down as someone suggested on here. Now my friends can no longer say i made a table, turned it over and threw a pillow in it. Now I did all that and then cut the legs off! Hahahaha! Steve W thanks for the idea! I think it looks better!
  4. In the dog house (my mutt gets her own bed)

    Decided to build a dog bed out of 5/8" particle board for our poor, unspoiled, mutt. Base built with biscuits, glue and screws. At some point I switched from inches to centimeters, never do this mid-project. The base ended up a bit shallower than I meant but the dog won't care. Base is screwed...
  5. Dog Bed

    This is, or more accurately was, a bed for my beagle Royce. Apparently he thought it looked more like food. It was made from two 6' 2×4s, a piece of 1/2" MDF, and a cheap pillow and pillow case, so no big loss. The piece of MDF was inside the pillowcase with the pillow and was sized to not fit...
  6. Half scale staircase dog bed

    I made this half scale staircase to be used as a safe elevated platform for kids to see displays. Now it has been claimed as a dog bed by our 3 yr old Maltese, Bobby, who likes height! The stairs are completely made from pine and traditional staircase construction. I took photos throughout the...
  7. Dog Bed From Free Pallet Wood

    Ever since I made my bed, my dog has been going on it so he can look out the window. So I knew that I had to make a box to raise his dog bed up so he can look out the window on his own bed. He sheds a lot, so I wanted him off my bed. I designed this bed on SketchUp and changed it a little as I...
  8. Dog Bed

    Here's my dogs bed. All my friends say they would be more impressed if i flipped it over and called it a table, but wheres the fun in that. So it basically is an upside down table with little feet on the bottom. I could have gone with smaller legs (no I didn't turn them,I'm not even close to...
  9. Four Poster Dog Bed

    This is a dog bed I made for an auction at a local Humane Society
  10. Doggy Bed From Pine & MDF

    Our dogs always seem to want to be higher up than just being on the floor. I got some pine boards and some leftover MDF to make a dog bed platform for them. The front I cut out so they could get in easier being they are fairly small dogs. I also like to paint things black if you can't tell...
  11. Poplar Dog Bed

    My little sister (18 years younger than I) wanted a dog bed for her mini Australlian Shepard. She found one online that she liked, but didnt want to pony up 180 bucks for a dog bed - commission big brother :) This one fit the look of the one she liked. Started as a lowly piece of Poplar from...
  12. Dog Platform

    Yes there is wood in this project! The dog and I are headed out east next month and I wanted to give him some room in my extended cab pickup. So I took out the back seat, removed the fold-down center console from the front seats, and built this platform. It's a 2×6 frame underneath a 1/2"...
  13. Dog Bed

    I made this dog bed for my brother's new puppy. The pillow is corduroy from Petsmart ($20). It took his clumsy Akita a while, but he finally figured out the bed's purpose.
  14. DIY Dog Bed (video)

    I made this dog bed from offcuts from older projects and reclaimed wood from a skip. It was a very quick project as we needed the bed for our awesome new dog Chase! I used the Kreg R3 to join the box together and finished it with milk paint and water based lacquer. It was a really fun build and...
  15. Dog Bed - Bed

    Made this while taking a break between projects for one of my favorite clients - I can't see a reason that the dog can't have a nice piece of furniture too! White Oak with Ebony Accents. Frame and panel style with M & T construction. I finished it with Spar varnish because it turned out...
  16. Dog Bed

    Here is a quick dog bed I made for someone. He had the couch cushions from a couch he had gotten rid of, so I made the frame to fit the cushions. It was a a pretty simple and quick build, the sides were pocket screwed tot he bottom and the trim was just simply nailed into the sides. Nothing...
  17. Woodworking Skill Share
    Just finished a sideboard cabinet out of curly maple and decided to use Danish oil in the golden oak color. I tried it on a small test piece and I was pleased with the shade, but when I put it on the sideboard and wiped it off it turned out TOO yellow for me. I was going to put at least three...
  18. Blogs
    Sketchup Plan We just adopted a boxer after having fostered a few of them and falling in love. Tyson is a great dog and I figured a dog like him needed a nice bed. I drew the design using Sketchup and it has been in the planning stages for quite a while. I bought a Kreg pocket hole jig and...
1-18 of 18 Results
Top