LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Floating Record Player or turntable Mounts/Platforms in DJ format

    Just another-"Necessity is the mother of…."-thing. My studio/apartment in NYC is low on space so I figured my Technics would get more use if they were floating on the wall, rather, than if in storage. Stand- by for my twist on the Murphy Bed. The surfaces are ply. Structure is mild steel...
  2. Patio / Deck Cooler Stand

    This patio cooler stand is made from cedar decking. 62' to be exact. It holds a 48 quart Igloo cooler. The top is hinged, and the cooler cover is mounted within the top. Bottle opener, and cap catcher complete the case. The cap catcher was made from some scrap tin I had, and assembled with...
  3. A Pool Side Deck Just Finished Thursday 6/2

    Not the usual square or rectangle this time. This is a little higher off the ground than usual for pool access. The homeowner passed on the lattice or underpin for now. Solid as a house foundation and as usual all screwed with Deckmate type screws. We started about 11:00 am Tuesday and...
  4. A few of my deck projects

    I don't get a lot of shop time, but I do get to make sawdust for a living. All of these decks are made with Ipe. The first 5 are in Brooklyn, NY, and #6 is in Manhattan. Thanks for viewing.
  5. Designing Woodworking Projects
    I am building a 700 sq ft deck about 14 off the ground and would appreciate your thoughts and expertise on the following: Is Thompsonized material better than Yellawood? What are the benefits if any of 5/4×6 compared to 2×6 decking? Can I lay the decking at 45 degree angle with 2×8 16"...
1-5 of 5 Results