LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

41-60 of 500 Results
  1. Lathe Table

    Somehow over the past couple months I've ended up with as many mini lathes. Not that I'm complaining at all, but they needed a place to live. I'd rather rapidly taken over the entire table top in guy pal's garage. Given that my tools and I will be moving to our own garage in a few months, I...
  2. Custom Made Entry Door; Curly Maple & Curly Cherry, Leaded Glass Panel, Hand Carved Letter "R"

    This is a posting for a project that I helped with. I have a friend, and fellow woodworker, who has custom cabinet and door shop close to where I live, by Cottonwood Falls, Kansas. His name is Charles Jones, of Jones Custom Woodwork. On this door, I only helped with the carved "R" and the I...
  3. Custom Harley Davidson bar and shield

    All beech with remote controlled led lights. Hangs on custom mounting system to support weight of about 60lbs. Hangs out from wall about 4 inches.
  4. 8 String Guitar Body #2

    Finished my 2nd guitar body build! It is an extended range 8 string guitar body made out of solid quartersawn bubinga with a small diagonal wenge accent. This was a remnant I had left over from my coffee table I built a few years ago. I had always planned to turn it into a guitar body and I...
  5. 13" tall candlestick holder

    Yeah, yeah, I know I said my other holder was the last one, but I had a request for a BIIIG one and just couldn't resist the challenge. I turned this behemoth (the largest I've turned so far), nothing else real special here, but I had my first real experience with shrinkage (ha). The top was...
  6. Custom Bookcase w/ Adjustable Shelves

    This is a custom bookshelf made to fit into a closet. It is made from maple ply and 4/4 poplar. Most of the shelves are adjustable. The finish is SW primer and SW Pro Classic satin. A total of four coats were sprayed.
  7. Wooden TV Remote

    This is one of my favorite projects yet! I flip a boring plastic TV remote into a two-toned wooden beef stick. And what did I use for a battery cover? Another remote of course! It's two remotes in one held together with magnets! Watch the video of me making it here!
  8. Twin/Full Custom Bunk | Custom

    I don't normally build this style of bunk bed since there are some many imports in similar style flooding the market, but I had a special request. This custom like the style bud didn't want screws showing on the end panels that attached the side rails. They also wanted to add some drawer extra...
  9. Fancy Wood Cane #023: Claro Black Walnut & Maca Wood

    This is one of my favorites, as the handle is an extremely dense piece of Claro Black Walnut and the shaft is Maca which is not commonly found, although it's being farmed and is quite beautiful. This is an earlier photo of this cane when I had first applied pure tung oil and tried a wax finish...
  10. McMullen Master Vanity

    This was my first ever cabinet. This vanity was made for friends of mine that were finishing up some remodeling just in time for the Billings Heritage Home Tour. The key elements to making the vanity look like a piece of furniture were the legs and the unbroken faceframe. The construction is...
  11. Red oak shelves with custom trim and routed brackets.

    These shelves were made out of solid red oak for a friend and turned out quite nice. This is before the stain and lacquer finish. Nice red oak trim on the edges and a simple cove on the brackets brings balance to the shelf.
  12. Contemporary Dresser | Custom

    This is a dresser that was commissioned by a customer that was going to use it as a changing table. The brought in an example of something similar and we modified the size to fit their purpose for it. With it having a more of a dresser look the customer will be able to use it even after the...
  13. Restored Hand Saw [New handle, hard wood]

    I had a old hand saw laying around my garage, it was part of larger saw that the tip broke and the handle started to rot, so I decided to try to make a new handle. The first attemps didnt go very well and I decided to try again with a harder wood. I ended up chosing hollow (azinho) basically it...
  14. Custom Cake Stand

    My middle son is getting married in March and after looking around for a stand for the wedding cake wanted to know if I could make one. Well you know me-couldn't refuse the opportunity to make a new project so here it is. Made from Peruvian walnut the top is 16" in diameter with a 10" base and...
  15. Sink Bridge / Sharpening Station

    Not long ago I was looking for new ways to make sharpening my handtools easier, and after a long time I discovered pictures of metal sink bridges for water stones, soon after I decided to make my own. I basicaly grabed two scrap pieces from old projects and figured a way to merge them together...
  16. Custom counter height (ish) table.

    I was asked to build this custom table that sits a hair above the counter and movable so that it can be used close to the counter for breakfast and homework, but also turned out for larger gatherings for people to stand around and socialize. This was my fist table build and I learned a pile...
  17. Custom pen case

    I made this pen case for someone who wanted it for their boyfriend because he loves pens. The wood is black walnut, the finish is shellac. I used felt for the pen holders, and the pen trays can be easily removed and replaced when necessary. I don't have a picture of this, but it is also...
  18. Walking Cane: Carved Art Cane for a friend nicknamed "Taz", Scrimshaw, Silver, Antler, Curly Maple

    ---------------------------------- Copyrights: I realize that "Taz" is a Trademarked icon of Warner Brothers. This one-of-a-kind Art Cane is not for sale. The cane design is by "Taz" collector Don Oehler, and I'm the artist, for this one-of-a-kind piece of Sculpted Art that he asked me to...
  19. Crib Built from Pallets

    I was short on funds and was about to have a son. I was able to get some big pallets used to ship large generators for cell phone towers. I looked through magazines and catalogs until I decided on this design. I liked the look, but every one I had seen was made so cheap and out of thin wood to...
  20. Oak Headboard from reclaimed wood.

    Here is a headboard I made for my wife. The post are solid Oak 4 ¾ x 4 ¾ x 7' tall. Again money was tight so I used what I had. The headboard is actually a piece of ¾ ply with ¼ inch oak ply sliced up into 3 ½ inch wide pieces and glued together. I used the back side of the ¼ ply that had a lot...
41-60 of 500 Results
Top