LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 46 Results
  1. Simple Book Case

    Built in the late 1990's. This simple book case is made from birch plywood with a solid birch face frame, base, and molding. The choice of materials and construction techniques allow for relatively quick construction. I used half-lap joints on the face frame. I made the molding by...
  2. Patio Cover

    This patio cover was added to a back yard as a transition from the indoor living spaces to the backyard areas and pool. The roof was framed so that the soffit, fascia and gutters tied in with the existing house. The posts and beams where trimmed with cedar and painted white. The ceiling is...
  3. cherry display cabinet

    This was a piece i made during the Fine Furniture course. It is made from cherry veneered plywood for the box and hand made crown molding from solid cherry. The glazed doors are also from solid cherry, with mortice and tennon joints. To achieve the look of an aged piece, i washed the wood...
  4. Bathroom Wall Cabinet

    My oldest son has moved down to the basement, and as such uses the small bathroom in the basement. However, there isn't much space for everything in there, so my wife suggested I make a wall cabinet for his stuff. So, I grabbed my son, and we got to spend a day in the shop! This cabinet is...
  5. Crown molding shelf

    Made this shelf out of premade crown molding. Used red oak for the top. Had to stain it dark to get it to match the furniture already in the room. Used a dark cherry finish with a few coats of poly on top.
  6. Sawyer Entertainment Center

    Its a small world. These people found me in the madness of the world wide web. They asked for references. The day of install, I found out that Rob worked with another person that I did work for several years ago. That wasn't one of the references I provided, but certainly an enormous trust...
  7. The Judge

    After chatting with a prospective customer for a bit, he told me he wanted to upgrade his entertainment area with an entertainment center and some shelving for the bar area. We were to match the existing bead board wainscoting. That would be easy enough, although everything was pine. Burn, baby...
  8. Queen-size Bed

    This bed is made of solid white oak, except for the panels, which are white oak plywood. All of the lumber came from the same tree and was purchased from a fellow member of my local woodworking club. There are thirty-eight mortise and tenon joints in the headboard. The design of the headboard is...
  9. Decorative Bedroom Wall Shelf with Crown Molding

    January, 2010-Another job completed on the "honey-do" list. My wife saw a photo (insert in first picture) of a nice shelf over the bed and she asked me to make one. Although it is a basic project, there were a couple of choices and challenges. First challenge was the size. This shelf is...
  10. Display Cabinet

    One of several cherry/walnut trim cabinets I've done recently. Nothing fancy - frame/panel construction, shop made crown molding. No stain. Lacquer over tung oil.
  11. Oak Bath Cabinet

    Solid Oak bath cabinet I built for my wife. I'm pretty happy with it overall. This is my first attempt at cope and stick joints, and it took several attempts to get the arched rails to come out right. The shelves are dadoed into the side panels. Shelf brackets are Knape & Vogt Pilaster...
  12. Ogee Foot Bookcase

    This is a little somthing I built as a christmas present for my wife. It's constructed of Oak and stands about 60" high and 36" wide. The shelves are just plywood banded with solid materail and are adjustable. For the most part it was built from scraps i had in the shop with the exception of...
  13. Tapering Jig

    My new tapering jig! Made from 3/4" plywood and walnut scraps for the fence and the runner underneath. Used it to cut some tapers on these table legs and it worked out very well. Hope you enjoy and comments/questions are always welcome.
  14. Fast vertical level

    Working on a wall,i accidentally dropped a brick above my aluminum level and broken her.I made very fast a vertical one from wood.It took me less than 10 minutes to make and it is made from oak wood.The round hole i made it with an cove bit 3/8" which was perfect with bubble device diameter.
  15. Golden Boxes

    Here are three boxes I made using my Golden Ratio Dividers (GRDs) and my Bevel Sled. The first two boxes are made out of crown molding. I simply ripped the crown bevels from the edges of the molding to make the working stock. I picked up the molding at our local Habitat for Humanity ReStore the...
  16. dining room hutch

    This is a New Yankee Worshop plan made from pine. The base cabinet has edge joined solid wood sides. The top is jointed with biscuits. The back of the shelf unit is bead board tongue and groove. This was an awesome project to learn lap joints which were used on the face frame, and of course...
  17. Memorial bench

    Memorial bench complete and shipped to it's final resting place. This bench was finished with and outdoor spar urethane. We freehand burned the words into the bench, we my wife did.
  18. Wall Mount Wood Rack

    This is the other rack I have. It is also really rough, but is currently serving it's purpose. I wanted to use the 2×4's from the walls were we removing from our house for some thing and this sounded like a good idea. I decided to make this and my rolling rack hastily out of rough material...
  19. Craft Room Cabinets

    We moved into our new home 10 months ago. My wife's craft room is 5' 8" wide by 9' long and I promised her custom cabinets so she could utilize the room as an office and craft room. She's very happy with the design and the functionality of these cabinets in her new room. I used the...
  20. kitchen lacquer repaint

    This was a "fun" job. Started with some old Home Depot oak cabinets. Added crown molding, light rail and a wine rack and trash roll out cabinet. Then we Sanded all the doors down really well and added 1/4" panels to finished ends where needed. Covered everything with tape and paper and then...
1-20 of 46 Results
Top