LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. MORE COYOTE CALLS

    More Elk Antler Coyote Calls. I have refined the design a little and tried to make the mouth piece look like it grew right out of the antler. These are Bubinga and Cocobolo. I have burned my brand on to these, it can be seen on the shoulder of the call, it is a Bar Lazy U.
  2. OSAGE ORANGE / ELK ANTLER COYOTE CALL

    Another elk antler coyote call. The mouthpiece is made from osage orange given to me by one of my co-workers. This is the first time I have worked with osage orange, it is really nice to turn, it machines so well that I was able to get such a smooth finish with my carbide tools that I started...
  3. ELK ANTLER / OSAGE ORANGE COYOTE CALL

    Cottontail distress call made from elk antler and osage orange. The marrow of the antler is sealed with CA, finish is spray lacquer.
  4. ELK ANTLER / WALNUT COYOTE CALL

    Coyote call made from Elk antler and walnut. Finish is spray lacquer and CA. For those not familiar with these they make a sound like a crying baby. Waa waa waah.
  5. MULE DEER ANTLER / BOCOTE COYOTE CALL

    Coyote call made from Mule deer antler and bocote. Finish is spray lacquer and CA. For those not familiar with these they make a sound like a crying baby. Waa waa waah.
  6. ELK ANTLER COYOTE CALLS

    Coyote calls made from wood and elk antler. The left one is cherry and the right is walnut. The cherry one has a cottontail reed and the walnut a jackrabbit. Finish is spray lacquer.
  7. COYOTE CALL

    Coyote call made from a shed mule deer antler burr and cocobolo. It has a replaceable rabbit distress reed.
  8. ELK ANTLER COYOTE CALL #3

    Coyote call made from Elk antler and walnut. Spray lacquer finish. About 5" long. It required a lot of CA glue to stabilize the inside, the antler is very porous. This one is a long range jackrabbit. The walnut is scraps from some fancy wood I turned bowls out of. I just could not throw away the...
  9. Deer Antler Coyote call

    Coyote call made from Mule Deer antler and walnut. This one is a cottontail distress. Finish is spray lacquer. I usually make these from Elk antler but I ran out so I decided to use Deer antler. Deer antler is harder and denser than Elk antler so this one is a little heavier. This one has a...
  10. COYOTE CALLS

    Coyote calls made from Elk antler and wood. Woods are cherry, walnut and ambrosia maple. These required a lot of CA glue to stabilize the inside, the antler is very porous. Spray lacquer finish. About 5" long. Some of these were shown in another post. #3 is the first one I did and #5 is the...
  11. Power Tools, Hardware and Accessories
    UPDATE: I appreciate everyone's responses to my post. I decided to order the Grizzly 555LX yesterday, and bought the table saw Steve Ramsey at woodworkingformeremortals.com from Lowes yesterday. For now this bandsaw will do more than I need it too, and this is my first REAL table saw. I have...
  12. Designing Woodworking Projects
    Not my work but saw it just had to share with my ole lumberbuds. ... . . . . .. . .. . utube video Water Experiment No. 33 Automata What a beautiful work of craftsmanship. By: Dean O'Callaghan
    jig
  13. Wood & Lumber
    I had a Maple log sawn to 5/4 last August, stacker with dividers stored under a tarp in North MN. what moister should it be down to so I can make a Table?
1-13 of 13 Results
Top