Search Results for ‘corner cabinet’

I started this corner cabinet maybe three years ago and finally just got all of the divided lights and glass shelves installed. Its loosely based off of a cabinet I saw on The Woodwrights' Shop, which is in turn based off of a classic cabinet located in the metropolitan museum of art. The upper...

Solid pine corner TV stand loosely inspired from traditional French-Canadian cabinets. The six inch high open cavity provides a decent amount of space for AV equipment. Raised panel doors swing 180 degrees to allow easy access to the bottom compartment, which is fitted with an adjustable shelf...

Just finished this corner cabinet for my mother-in-law. Wanted to build her something special for Christmas as her mother just passed away. I'll be delivering it tomorrow if my wife will let it go. The design was based on the 100 year old glass panels I found on craigslist (from a fireplace)...

These are Utility Room Cabinets that I was hired to do back before Christmas. Because of the holidays, it made it very difficult to get done in a timely manner. However, as of today I am done! I would be proud to have such a cabinet in my utility room!!! It is all oak and oak veneer ply. I...

this was my first foray into the joy of making a corner cabinet. It was a total PITA but turned out ok. My wife insisted on wanting one for our dining room and threatened to buy one for 2.5k if I didn't build it so I bit the bullet and forged ahead. The deal was that I would build it and she...

This is a Chinese Checker board I recently completed in Oak and Walnut. I made the board by cutting strips of oak and walnut to width, cutting the angles and end gluing then together, then edge glued the strips together. the dimples were cut using a template, plunge router, and 1/2" ball router bit.

walnut slab counter . walnut corner cabinet with ambrosia maple panel and shelves that cantilever off both sides. file cabinet is on casters and can roll out from under counter. chiar is walnut with a sycamore seat.

Fr. Gerome wishing to display the Chrism oils, looked through his church furniture catalogue and found a cabinet he liked (only ~$300), except he wished it to be triangular and mounted in a corner. Somebody mentioned my name; you can guess the rest of the story. Starting with the height of the...

This corner piece was constructed out of cherry with a chestnut stain. The interior is made out of birch and was left natural so that items would not get lost in a dark corner. Corner pieces can be challenging to build due to having limited space. There are four hand turned columns which makes...

After a year and a half of sitting in my kitchen without doors, I finally finished this thing. The doors didn't really take that long with the cope & stile router bits. I made the bottom 2 doors in about 2 hours, such that my wife wondered what I had been waiting for! The middle section looks...

Early 19th Century inspired corner cabinet made from flame Birch. The interior is painted with milk paint and the hinges are hand wrought from Horton Brasses.

This is just a quick Decorative shelf / Corner Cabinet that I made for the Misses. Its made of Red & Black Oak - just lumber I had left over and all the shelves are dadoed into the legs. Nothing too fancy - just a little bit of a head scratcher for someone who is not great with angles! Sorry...

one of my pieces (which I posted here a while ago) will be featured in an advertisement for the Pennsylvania dept of tourism. The ad will be used to promote Pennsylvania's many artisan trials. piece featured is a sycamore, curly maple, and walnut corner cabinet with curved front and doors.

THIS IS THE CORNER CABINET I JUST FINISHED. THE IDEA CAME OUT OF THE JC PENNEY CATALOG, THEY HAVE THEM IN RED OR WHITE. SINCE THESE COLORS DON'T WORK I BUILT MY OWN USING THIER DIMENSIONS. IT MATCHES THE WALL HANGING HUTCH THAT I BUILT ABOUT A YEAR AGO. ALL SOLID OAK WITH BEAD-BOARD BACKS AND...

I needed a storage cabinet in the games room but it had to be one that didn't interfere with the snooker table. A corner cabinet was the solution. essentially made from veneered plywood with a light 2"x1" frame built into the wall. Now I am thinking of making an overhead cupboard to match. Grumpy

This is a corner tv stand and shelf I built forum father. He pushed me so long till I gave in and made it. I was dreading getting it to fit tight in the corner of his room, that's when I decided to leave the back with a small opening so he could use that area for the power cords. When I built it...

A customer wanted to display his collection of footballs. First inset door that I made. Turned out I had to shim the edge because the wall it was attached to wasnt' square. Caused some concern at first until I figured it out.

This corner cabinet was built of maple and maple plywood I had a tough time with the arch panel door. Not so much with the panel but the top rail as the first one split out as I was routing the inside groove. I learned to watch the grain direction more carefully I was very pleased with the...

Built this corner cabinet for a dr friend who collects elephants. i made most of the style/ rails from maple flooring with mirror in the rear sides

I wanted a table saw for my birdhouse work, and thought I might want a good one for other purposes. So I asked my chief of staff if she would like me to build her anything. She said a corner cabinet. So I set up shop accordingly with a good table saw and miter saw to begin. Honorable mention...