LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Wine Cork Cutting Jig

    WINE CORK CUTTING ON A BAND SAW WITH A JIG [1.0] To make this jig, you need a piece of wood no less than 1-1/4" square on the sides and about 5" long, which happen to be the measurements of my jig. [1.1] The measurements of the jig can be varied. As long as you have enough room to drill the...
  2. RHAM Boot Jacks

    I made these for an awards banquet, 10 of the kind on the left, and two of the horse head, shown on the right. Three were made from white oak, two from maple, and the rest from walnut. All lumber is locally grown, milled, and provided from here in southwest Michigan. I used Watco Danish oil...
  3. Jigs & Fixtures
    WINE CORK CUTTING ON A BAND SAW WITH A JIG [1.0] To make this jig, you need a piece of wood no less than 1-1/4" square on the sides and about 5" long, which happen to be the measurements of my jig. [1.1] The measurements of the jig can be varied. As long as you have enough room to drill...
1-3 of 3 Results
Top