Search Results for ‘corian’

Night Sky Corian coffee table top with 1 1/2" build-up, bullnosed. The legs are laminated with Chem-metal, with a swirled finish. The apron is a copper Chem-metal with a brushed finish. The leg bottoms are wrapped with Black Quartz Corian. The table stands 15 inches high, 16 inches wide, and is...

This is my 41st bowl and I don't know what kind of wood it is. It is 6" x 2 1/2" with a 1/8" wall and finished with clear matte spray. It had cracked when I started on the inside so I had to take it off and epoxy it and re-turn the outside and the inside. This is one of the 4 pieces I soaked in...

Hey Lumberjocks, this ain't lumber it's Corian and it is fun to work with. I acquired some pieces of this material from a cabinet maker, I use it sparingly. I was between projects and saw my small stash and wondered what I could make and thought of this. Most important my wife really likes it...

Oct 12, 2014 I love pizza and I have been going to the same place for 15 years. The owner is really nice and gives me a good price on the pizzas. In return I try to make gifts for him. Last month I gave him a Pizza Cutter that I made from a kit from Rockler. This month I thought Iʻd make him...

As a carver and bowl turner, I never thought I'd enjoy turning pens. Until I turned one. For me pen turning is addictive, and a lot of fun. I like the technical precision of it. I still turn primarily large bowls and vases, but on those days when I don't have time for a large project, I can...

Here's a few sketch pencils that also take a mini pen insert. 1 & 4 are acrylic. 2 is corian. 3 is jatoba. I got the components from PSI. The first was my first attempt at an acrylic other than corian. I like turning the corian better, but finishing is still many times easier than wood.

6 pendants. Material - Corian (acrylic stone).

Materials: Corian (acrylic stone), G10 and ebony wood

I found the Bright Copper Sedona kits on sale a few weeks ago, and wish I'd bought more. 1. The first is Olive Wood. I was a bit dissapointed when the dark figure turned off of the lower barrel, but I still like the way it turned out. 2. Second is Bone Corian. This one was an 80th birthday...

A thread Sac started on inlaying resin prompted me to show a little project using Corian and Inlace resin. I did this a couple years ago for a jewelry box project that still hasn't been completed (not really even started yet at this point). Got diverted with numerous other projects. But my sis...

Recently I met with some Lumberjocks in Arizona and they gave me some material that I turned into projects. The first one is a black Corian grapefruit bowl. The Corian is from LJ Lizzardhead in Tempe, Az. It is 5 layers with 5 minute epoxy in between. A mesquite spigot was glued on to keep the...

These are examples of my first attempts at turning solid surface on the wood lathe. The material happens to be Corian. Yes, I know this is a woodworking site. However, as woodworkers we at some time are going to have the opportunity to incorporate other material forms into our woodworking. I...

I have read a lot about the Longworth chuck and thought I might need one some day so I built this one out of Corian with spanner wrenches made of maple, walnut and brass. The instruction for building one seemed to be the most complete in the following link...

Hi all, glad to be here! THought i would show some of my work. Custom made turkey calls.. Variety of exotic and domestic woods. THanks! Enough for now! Mike

We had one last plant without a a stand that has been sitting a TV table. I decided it needed a stand and I had the pretty piece of white corian with a neat pattern in it that would work just fine. It is red oak and white corian with black corian threaded risers to give it a floating top look...

I received an order for some rings from the last craft show and I finally got the material to make them. There are 3 size 13 rings and 2 size 5 rings. The ones on the left are deep nocturne black corian. the center one is Osage orange and the two on the right are deep black quartz corian. All...

This is the 3rd iteration of this design: First was wood with wood dowels, clear finish. Lasted 10 years but looked horrible. No way to keep it clean. Second was wood frame with stainless dowels. No way to keep white paint from flaking, and I tried several kinds of finish. So I made a frame...

This year I wanted to give my mom something fairly nice for Mother's Day and ultimately decided to use one of her childhood pictures and turn it into a Lithophane. The image in question After processing the image to clean up some of the grain I loaded a 6"x8" piece of Corian tile onto my CNC...

I built this nightstand based on Nakashima's Rose's Night Stand, and made the interior of the cabinet resemble a Krenov style cabinet. The woods are Sapele, walnut, and poplar, and it has several coats of General finishes Arm-r-Seal finish. For details, I blogged about the build here...

I had been thinking of making a cutting board like this for a while. Then I received this box in the mail . It was full of 44 Mag cartridge casings from LJ Hillbilly shooter-Thank you so much, John!! The next day I picked up my new Craftsman lathe in Illinois and I visited the counter top shop...