LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 220 Results
  1. Arts and Crafts/Rodel Dining Room Table

    This is a dining room table that I recently finished, built of elm that was planted in Walla Walla by the first pioneers in 1840. I call it 'guilt free old growth'. It's all twice-quartersawn, and just magnificent, wood-wise. The table was patterned after a desk originally designed by Kevin...
  2. Office Metamorphosis

    Charles and Lori were dissatisfied with their home office. The mismatched office furniture was overflowing with electronic, computer and photographic equipment. They obviously needed more storage, counter and desktop space. Woodleaf Studios provided the solution, as you can see in the photos...
  3. Walnut Dining Table

    This is a walnut desk with 2 leaves in the middle. Overall total length is 9 feet. The legs are three similar forms glued together to create a tri-legged base. They are topped with with a piece of plywood that allows the rounded top sections to be screwed down. I used table extensions from...
  4. Mid Century Inspired Nightstands

    After building the contemporary bed, the next step was to complete the nightstands! Continue reading if you are interested in the process I used. The nightstands started off with a trip to a local sawmill I found on Craigslist to pick up some walnut for the main assembly and some white oak for...
  5. Bu Do

    This is the newest addition to my custom jewelry boxes. Bu-Do continues this series of sculptures that ties the medallion on top with the drawers. In this piece the drawer fronts and the inlay on top are all cut from a single slab of Spalted Maple lumber. The Honduran Mahogany case and maple...
  6. Gun Stock Carving: Walnut Stock Carved with a Wildlife Scene, Flying Ring Necked Pheasant & Oak Leaf

    This was a commissioned project. This gun was the third and final part of a set of guns I did for a family in Wichita, Kansas. You can see the Quail Carving by clicking here You can see the Tom Turkey Carving by clicking here If you have a gunstock that you would like to have...
  7. Panama Hat Crown Block Restored Restoration Fixed Repaired with New Sculpted Tipper Top Press Making

    This project is a restoration of a Panama Hat Crown Block and the mating Top Tipper that I made new. ------------------- Project Story: I have been making a lot of Hat Maker's Tools, especially since the economy went down and the bigger flashy furniture commissions became few and far between...
  8. Contempo Murphy Bed| Custom

    This is a Murphy bed I built in March 2017. We call it the Contempo. The Contempo is normally a real contemporary design. It is characterized by two large doors on the face. This customer choose to have one bookcase only on the left side. The bookcases normally are shorter than the bed section...
  9. cherry and curly ambrosia maple dining table

    Cherry split apron base with curly maple accents. curly ambrosia maple top with natural edge. 6' x 34" x 29.5".
  10. Euro Murphy Bed Moved Leg | Custom

    This murphy wall bed is my common Euro design. On this one, I moved the leg up a little. This freed up a little space on the face of the bed. I think it is a good look to it. Don't know if I want to change it as the "official" euro design yet (lots of internet pictures would have to be...
  11. Nether Edge Farmers Market Summer 2011

    Just an update on how the stall looked this weekend. . . . in situ! Was a great day for sales and a few ostrich burgers to boot! Thanks to all for their fab feedback on the stall & products :) More images on my Facebook page here: http://www.facebook.com/pangadesign and remember to LIKE the...
  12. Outdoor Dining Table with Benches

    My In-laws asked me to build an outdoor table and benches almost two years ago. They only had one requirement, that it be as long as I could confidently build. Before I embarked on this project it took me a while to decide on a style and materials, then it took a little longer to acquire some...
  13. Custom XL Sliding Barn Door

    Here's a massive sliding barn door I recently made for a customer. This thing weighs about 400-500 lbs. and is made of steel, birch plywood, and grey hemlock siding from our lot. It measures 64" wide and 105" tall and slides over into a recess the customer had built into the room. We sprayed the...
  14. Contemporary Reclaimed Barn Wood Sliding Door

    Here's a recent build I did using different barn woods from our lot. The customer picked out all of the different pieces at the lot and then I ripped them, jointed the back side, and brad-nailed/adhered them to the birch plywood. when it was fully assembled, our finish guy did a great lacquer...
  15. Modern Floating Vanity

    Just finally finished putting on the drawer pulls so I could get some finished pictures of this uploaded. I built this vanity out of sapele wood. Carcass and panel were joined together with dominoes. I wanted to make sure this thing was rock solid and could take the weight of what I required...
  16. Chest of drawers

    A modern chest of drawers made of sapele (Entandrophragma cylindricum) with home made brass pulls. Solid wood throughout, except drawer bottoms. Top and outer sides are made of single boards that wrap around the perimeter for visual continuity. Dimensions are 109×84 x 42 cm (43" x 33" x 17")...
  17. New one of a kind end tables Eucalyptus top/cypress legs.

    These tables are my new design that im running with and making a few for friends and family and anyone else who asks!! there a three leg design that looks off balance but stays true contrary to what your eyes make you think. These tables are created out of high quality Eucalyptus top with...
  18. Backenzahn Solid Oak Stool

    Considered a design classic, the ST04 Backenzahn has become an identifying icon and part of several permanent exhibitions in museums. With its four identical legs made of solid wood this stool really gives a strong impression. The legs taper downwards with two deliberate incisions. The gaps...
  19. Another Mixed Hardwood End Grain Board

    Hot off the press today with another 3 near complete (pics to follow). Really pleased with this one as the end grain showed some gorgeous colouring and detail. Oak, Ash, Padauk, Sapele, Maple and Beech. Rounded finger holds added using a 1/4" bull nosed router bit. Dimensions - 450mm x 320mm x...
  20. iPad Pulpit

    Here's an interesting project. This is a pulpit (podium) for iPad. It's made of reclaimed American Chestnut barn wood, steel, aluminum, and calf skin leather. The chestnut came from a barn we call our "Chestnut Barn" that we tore down in Pennsylvania. The patina on the surface was so nice and...
1-20 of 220 Results
Top