LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 166 Results
  1. Computer Desk/Table

    I little fine tuning left, but for all practical purposes its finally done… Made entirely of MDF (she wanted it painted to match the woodwork)..what was I to do? Opppsss…the desk top is made from a peice of 1/2" Corion Does this count as a woodworking project? On to something else I guess.
  2. All new Binary Keyboard..... 2010 model

    Introducing the all new 2010 model of Hemlock Co.'s binary keyboard. I made this for a friend at work who has been kind enough to take me under his wing during this last year. He is a software developer in our department who is highly respected for his quality of work. I approached him asking...
  3. Student Project: Computer Workstation

    One of my students, who has been instrumental in assembly and figuring out our Shopbot CNC router has been coming in early every morning to "make stuff." One of his creations is this table to hold the computer that we use to run the Shopbot. We went with a three legged version because our floor...
  4. Computer armoire

    My wife was looking at a computer armoire in a magazine and asked if I could make it. I did the best I could and for my first big project I must say I think I did OK. It is Oak plywood case with red oak trim on all the exposed edges and solid oak doors. Finish is all hand rubbed with 4 coats of...
  5. Headphones Stand

    This is one of my first steps into woodworking. I made this headphones holder as a step on my gaming setup build. Its all made of reclaimed wood and hold together using joinery. You can see the full video of me building them in my youtube woodworking channel Im portuguese so the video is in...
  6. Computer Desk

    I built this a few months ago and just found the pictures. It is red oak, mortise and tenon joints with an oak plywood top. The top compartments is built but still have to finish and assemble.
  7. Epic Wooden PC Case - WoodWorkLIFE

    Hey Guys, This was a very special project combining two of my biggest passions, woodworking and technology. I made PC case or a modded PC case whatever you want to call it, completely out of wood. For this project I used two contrasting woods that work wonderfully together, Sycamore and...
  8. ArduLift - Arduino controlled router lift

    I thought I would build a lift from available plans, but… Here is a DIY computer controlled router lift that was a really satisfying project. Made for a drop in router table and uses a stepper motor for precision movement. Has an auto zero probe (that thing at the lower left in the first...
  9. CNC clock backplate

    A computer-programed CNC milled backplate for a clock.
  10. First shot at a computer desk

    This desk was a fun little project. My old desk had to go because, well, it was a ginormous monster for a small apartment. So instead of buying a new one, I decided to draw up some plans and go to work. This was the result. My favorite part is the raised platform for my computer and speakers...
  11. Audio Workstation / Desk

    Finished up an audio workstation for a client who likes poplar (because of color variations). Designed to snugly fit his gear, it features an 8/4 breadboard top with an incomplete half lap x-base in a two-tone finish with an arm-r-seal topcoat.
  12. Computer Monitor Shelf

    This was a fun little project I have been spending a lot more time than I used to at the desktop computer and I need to make some organisational change to the desk as I need more room and needed to raise the monitor up to a more reasonable height as I am 6'2 I went online for some inspiration...
  13. Office Suite

    I built this office set for the inglenook in our 100 year old farmhouse. The pieces are stained dark to match the trim in the house. I used pine lumber from home depot for its rustic appeal. There are a lot of imperfections in the wood and I didn't bother to fill or repair them. The main...
  14. Mobile Computer Desk (made in one day)

    Well thought and fabricated in one day, I made this desk without plan and I designed it progressively according to the scraps I had on hand in the shop. - Top 24'' X 16'' (29'' above the floor) - Sides 12'' X 25'' - Keyboard shelf 8'' X 22'' (25-1/2'' above the floor) - Keyboard shelf...
  15. Ross Murphy Bed and Desk | Custom

    This Murphy bed is a raised panel style front to simulate doors and drawers. This two door style is call the Ross. The customer chose to add bookcases with adjustable shelves and a desk. The bookcases are 24" wide and are all adjustable shelves except for the fixed shelf 1/3 of the way up...
  16. Simple Oak Computer Tower Case With Windows

    Simple design oak and Plexiglas tower computer case. Thick inlays of walnut and curly maple. Power button is purple heart. Walnut inlay across back for strength. Brackets for light and power button made of walnut. Custom aluminum brackets for top down drive installation. Holes made with...
  17. Computer Workstations

    I made these workstations for our shop computers at work. They are soft maple and walnut. I bought all 8/4 stock and planed & re-sawed it to get what I needed. This is one project that I seriously underestimated the time it was going to take me, but I am pretty happy with the results.
  18. Netbook trays

    My wife and Mother in law both have netbook computers now. They both like to use them in locations without solid surfaces such as laps in the living room. As a Christmas gift, i decided to make both of them smaller wooden trays to keep them elevated above clothing and thus freeing up the air...
1-20 of 166 Results
Top