LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 30 Results
  1. Bench/Desk/Chest combo

    I got to thanks Woody57 for his recent post about this very same project a few weeks ago. This is made out of veneer-ply with a layer of Minwax stain on top, I hope by this weekend be able to apply some sort of protection but I have not idea on what will be the best option so if any of you can...
  2. Bookcase/TV stand

    So we moved into a new home that has a bar in the basement complete with an entertainment area. Lots of boxes filled with books and nowhere to put the TV. So the solution was to create a TV stand in the corner with a bookcase on both sides. Simple construction, 3 - 4'X4' sheets of 3/4" plywood...
  3. Farmhouse Table

    Farmhouse Table. Clear pine,turned legs, beaded aprons and breadboard end top. Finish-Charles Neil's Pre-Color Conditioner - Blotch Control, Minwax Ipswich Pine Stain. Three coats gloss poly-two coats Satin poly. Pictures out side my home then at clients dining area.
  4. V12 HotRod

    The plane engine with a direct-flow exhaust is established, the air filter of zero resistance is added, the rusted bumper has decided to leave "native" :o)))))
    toy
  5. Mystery wood, live edge bowl

    This is a lovely piece of "mystery wood" that I picked up after the railroad people trimmed/cut some trees along some of the tracks that run through town. I have no idea what it is so I encourage you to give your best guess. It doesn't really turn worth a crap so I'll prolly see how the rest...
  6. V Drum Sander

    Finally finished my V Drum Sander, 30" drum on a 3\4" solid shaft, heavy duty pillow block bearings. Top is 48×19.5" with 9" of work space at each end for moving material Base is a repurposed router table from my late father in law Depending on the size of the material, it will handle 1, 2 or 3...
  7. salt snd pepper combo

    this is the first time i have tried one of these. it is turned from oregon myrtle wood. very easy to do.
  8. Scroll saw Jesus #4

    Hi guys this is a pattern I found on steve goods website. I made it out of pine and put some dark stain on it. Then I put a few coats of lacquer on it
  9. Marketplace Classifieds
    This Machine Has Been SOLD 1988 Felder BF5 41 & F3A Located In Asheville, NC Local Pickup Preferred Lightly used in immaculately well kept non-commercial shop. Many accessories. Very Good Condition. $10,000 or Best Reasonable Offer See More Photos JOINTER-PLANER Planing Width: 410mm...
  10. Power Tools, Hardware and Accessories
    I am considering buying this German-made "Scheppach HM2- Kombi Machine" https://nh.craigslist.org/tls/5854072583.html I have a small shop, so having something that is a heavy-duty, powerful machine capable of jointing at just over 11" (the owner says it'll handle up to 11-1/4") is incredibly...
  11. Power Tools, Hardware and Accessories
    I have been reading reviews of specifically Jet 8 and 10 inch jointer / planers. What is the consensus guys & gals? Is it better to have 2 dedicated machines or do the combos do a good job for a small operator with minimum space?
  12. Marketplace Classifieds
    Mini Max CU300 Smart Combination Saw, purchased in 2004 & used exclusively by one person. This combination saw is a planer, a joiner and sliding table and many more functions. The saw is in great condition and works without malfunctions and has been well taken care of. It is also wired for a...
  13. Power Tools, Hardware and Accessories
    Hi, So I purchased a used Minimax Fs35. The tables are flat when measured against themselves but are not coplaner. Unfortunately, I only have experience with adjusting parallelogram beds and am not sure how to adjust these. I assume there will be shimming involved, but I'm not sure how to...
  14. Marketplace Classifieds
    Hi everyone, I've been lurking and learning on these forums for quite some time but this is my first post. I read all the rules but if I step out of line please feel free to let me know. I unexpectedly picked up a Makita 2030 (because when one shows up locally you don't say no right?) about 6...
  15. Power Tools, Hardware and Accessories
    I would appreciate feedback on the Laguna Tools Platinum Series 12" Jointer/Planer w/ SCH (this is a spiral head model). I need a jointer/planer and am considering several including Hammer, MiniMax (does not offer the spiral head), JET, Grizzly, etc. Does anyone have this Laguna machine? If...
  16. Power Tools, Hardware and Accessories
    Hey, I have been looking at getting a jointer and planer separately but the cost of buying to good tools seperatly was a little too high. So I have been looking at getting a JET JJP-10BTOS as a single tool that can do both for $600. Does anyone have experience with combo tools? Is this a good...
  17. Off Topic Coffee Lounge
    Hey, I have been looking at getting a jointer and planer separately but the cost of buying to good tools seperatly was a little too high. So I have been looking at getting a JET JJP-10BTOS as a single tool that can do both for $600. Does anyone have experience with combo tools? Is this a good...
  18. Power Tools, Hardware and Accessories
    Now that I'm OMW to finishing the DC, I'm starting to put thought into my next tools. I need a Thickness Planer and a Jointer or a combo. I'm not sure what to look for. If price and space were no problem, I'd get both as pedestal base tools on mobile bases…..but it is. Even then though I've read...
  19. Marketplace Classifieds
    I am trying to restore a Makita 2030 jointer/planer combo machine and the one that I got did not come with a chain cover (164459-6). Thats chain cover B Does anyone know where I can find one. I have tried the replacement part websites and they list it as obsolete. I would rather have the...
  20. Power Tools, Hardware and Accessories
    Hello, I'm not sure if this is the right place or if it's improper to ask this. I recently had a new Grizzly G0634XP jointer planer combo machine delivered. I've cleaned it up and now it's time to set it up to accurately cut. I love woodworking, i'm new to it though and i'm not sure I have the...
1-20 of 30 Results
Top