LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 214 Results
  1. Dresser Hanger

    I was assigned to design a coat rack, so i incorporated the coat rack into something that i needed (a dresser). There are 5 drawers on this dresser, the bottom one being a pull down door for shoes of some sort. Also the coat rack bend is meant for you to lay out your outfit for the day while you...
  2. Kids coat rack

    The wife asked me if I could produce a nice coat rack for the Grandkids. Something nice, but not tall like our other one. so here He is.. carved the little boy on top from the oak, just added the arms. It's 54" high made from oak, with a through wedged tenon holding the rack post to the feet...
  3. Flip Down Coat Rack / Cable Storage

    Just a simple, flip down rack for coats or what have you's, like cables and such. The ones shown in the picture will, probably, get buried in the shop door so that only about half of them show. They will be secured from the opposite side of the door. For directions on making your own...
  4. I got distracted

    I went out to clean my shop today, found this piece of wood and well one thing lead to another.
  5. Poplar coat rack

    We'd been tossing our jackets on the back of the chairs in the dining room (which is what greets you as you enter the front door) since we didn't have a proper mud room or coat closet. We decided it was time to look into a solution. We went to the big box stores and saw what they were peddling...
  6. Hammer Head Coat Rack - Xmas Present

    Here is a coat rack that I made by cutting the heads off of three 7 oz. hammers for the hooks. This isn't my idea, I think I saw it on the Steve's WWMM Facebook. I made it for my grandfather for Christmas.
  7. Hall Tree

    A friend asked me to build a hall tree from an old door, but then she couldn't find one she liked. So I build this one from scratch, starting with rough cut maple, and some bead board. She wanted it antiqued… I think I like the way it turned out
  8. Fold Up / Down Hanger

    As, hopefully, can be seen in the pictures, these are individual racks that fold down for use and up out of the way when not in use. These can be made to hold heavy cords and cables, or just for coats and clothing. You can adjust the size to accommodate the use to which you put them. Just...
  9. Mustang Pony Coat Rack

    This week I made myself a Mustang Pony coat rack, it's made from White Oak and stained with Minwax Golden Oak finish. I painted the lettering and Shaker pegs Black, to give it some contrast. I designed the project in Vectric Aspire and carved it on the X-Carve CNC router. I used a 90 degree...
  10. St John's valet

    This is a project I recently completed for the Lumber to Legacy program auction in Albany Oregon (http://cityofalbany.net/lumbertolegacy). The lumber was salvaged from a construction project in Albany that removed seven very large native Oregon White Oaks. The trees were donated to the city and...
  11. Classroom Backpack/Coat/Hat Rack

    My daughter's 1st grade class desperately needed a new backpack rack. So I offered to build one. Today I did the installation and I think it turned out better than I thought. This replaces a bunch of dilapidated cheapo racks that had long pointy hooks, some of which were broken off. The...
  12. Natural Edge Coat Rack

    Back in October of 2009 as the wife and I were taking a drive through Rocky Mountain National Forest, we were shocked at the amount of forest that has been destroyed by the Pine Beetle. In some places entire mountain sides of trees had been killed by this beetle. There were large piles of logs...
  13. Wall mounted mirror

    Just a simple mirror and coat rack made from oak. I had a bevel put on the glass, this sure is a nice way to dress up a simple project. The design was modified from a Woodsmith magazine project #133. It see's a lot of use being located by the back door. I added a side image of the trim since I...
  14. Live edge coat rack

    Made from beetle kill pine. Used a brad nailer to help hold the bark in place. Finished with Danish oil and sprayed 4 coats of polyurethane.
  15. Stocking/Coat Hanger

    After moving from a 100+ year old house that had four fireplaces to a duplex that had none, my wife and I were trying to figure out where to put our Christmas stockings. During the discussion, I had a stroke of genius (or maybe not…but I like saying I had a stroke of genius, so cut me some...
  16. Quarter Sawn Oak Coat Rack

    This is a coat rack that I made for my brother out of quarter sawn white oak. The quarter sawn flake didn't really come through on the feet which was disappointing but it looks pretty good on the post. The design was based on a similar design that my parents had when we were growing up. The...
  17. Rustic Bow Rack

    Made this for an avid bow hunter. Not real complex from a woodworking standpoint but I thought the creativity of materials was interesting. He had a few hooves that he wanted to utilize for a coat rack or bow stand. Mounted them along with some old bolts to hold his bow and a few coats. Made...
  18. Maple Ambrosia Coat rack

    I finished this a couple of weeks ago, it's just a maple ambrosia frame, assembled with loose tenons, and finished with tung oil. My plan was to put a oval inlay of walnut and some marquetry on the top, but I couldn't find a good oval template, i can always add it in the future.
  19. the coat rack

    I wanted to jazz up our entry way. My plan was to buy a bunch of wood stain and weather it then tack it up ship lap style then to add a coat rack. I had my cart filled up with wood at the hardware store and a walked past a box of these boards that were basically what i hoped to create. so i...
1-20 of 214 Results
Top