LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. Japanese tool box / chisel box (pallet wood)

    Japanese tool box / chisel box. A little tsūrubokkusu (I think!) So after a few days in Paris smelling no wood, but looking a lot on the web, making research for my grease box story (and resting due to my not always funny health), I had to see some shavings, and get the smell of fresh cut wood...
  2. Chisel Box

    I attended a woodworking conference a couple of weekends ago and in a moment of weakness when visiting the vendor area bought a set of bench chisels. One can only walk through a room full of tool vendors for so long without having to buy something. I decided to make a chisel box to store my...
  3. Chisel Box #2

    The second chisel box that I made this week. This one is for my set of mortise chisels. Like the first chisel box it is based on plans from Shop Notes Issue 37. However, I decided to make it in two halves. This box case is made from 1" strips of mahogany ripped from mahogany door jambs...
  4. Chisel box

    I purchased a set of Veritas PMV11 bench chisels and built a box to store them in based on Dereck Cohen's chisel box. The box is made out of hard maple and walnut. The chisels are held tightly in place within the box. Finish is Watco Oil.
  5. Chisel Box

    I invested in my first complete set of chisels and wanted to protect them forever. Its my hope is that these chisels and box last for 100 years. Its was made on the cnc - which I know is not the point of the hand tools however I like the clean aesthetic. Solid Maple 10×11x2. A dowel holds...
  6. Chisel box

    I got a set of vintage chisels from ebay- they were in a box but moldy with plastic liner, so I made a new one. Incense cedar (leftovers given to me by client), plywood panels from a stack given to me by neighbor, mahogany, shellac.
  7. Benchtop Chisel Storage

    I used to keep my chisels in an inexpensive leather tool roll, rolled up in drawer in the workbench. It worked well enough, but my habit was to leave it unrolled on the bench when in use, which had a tendency to catch all the shavings, dust, and chips then get rolled up and fall into both the...
  8. Chisel Box

    With the box I recently made for my wife (my first real project), I felt like I had to agonize over every single little step. I needed something I could just "throw together" without worrying too much about how it looked. I just wanted to build something, and for it not to take months. Enter the...
  9. Cherry chisel box

    This is a cherry dovetailed box that I made to hold a set of chisels. These chisels had round handles, and I got tired of them rolling around in their drawer. It's made from a solid cherry cutoff I had laying around in the shop. The dovetails are hand cut, and the finish is tung oil and...
  10. Chisel box guitar.

    Just made this the other day for a bit of fun with my friend. He had some spare guitar bits, neck, bridge, pots etc. and I had this old chisel box hanging about so we came up with this. We used construction like a cigar box guitar we had seen online. Basically the neck is bolted on to a chunky...
  11. Japanese Style Mortise Chisel Box

    I recently bought a set of six Narex Mortise Chisels from Lee Valley and I wanted a box to store them in. While looking i liked the simplicity of a japanese chisel box (thanks MaFe) so i modified the original to suit me. I figured a box like this would be better than a box made to fit only the...
  12. Blogs
    Necessary (and Stupid) Shop Time On Saturday and Sunday I had a good several hours of shop time - my first decent shop time in a couple weeks. But instead of getting back to work on my wife's box (finish, dang it!), I had to take care of some other business: rats. The back wall of our house...
  13. Designing Woodworking Projects
    staircase spruce wood from my mountain region,
1-13 of 13 Results
Top