LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 17 Results
  1. New Life for an Old Dresser

    My Fiance asked me to transform with dresser into something she saw on pinterest. I believe it is from the late 70s to early 80s during the mass production of this style oak dressers. Figuring out the bracing support for the seat was the hardest part for me. Sanding off the old varnish took the...
  2. Ranch Rustic Antique Shotgun Wall Rack Display Osage Orange Fence Post Bull Hide Kansas Flint Hills

    Wall Mounted Display Rack for an Antique Double Barreled 12 Gauge Shotgun, using antique Osage Orange Fence Posts from a Chase County Kansas Flint Hills Tall Grass Prairie Cattle Ranch. ------------------- Project Story This project was a commission to build a wall display rack for an antique...
  3. Molesworth Style Western Hat Rack Tack Wall Mounted Carved Painted Cody Jackson Wyoming Cowboy Horse

    Molesworth Style, Custom Built Hat and Tack/Coat Rack in straight grained Sugar Pine by Mark DeCou Studio THE HAT: This beautiful Beaver Felt hat was custom made for me by Jim Spradley, click here to visit his shop This particular Molesworth Style Hat Rack has been SOLD, please go to my...
  4. Deer Shed Antler Handled Steak Knives; Scrimshaw, Ivory, Turquoise, & Stainless Steel Damascus

    This Knife Set has been "SOLD", but if you would like something simliar, please email me at: [email protected] for more information. Here are other Knife Sets I've built: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Project Story I am...
  5. Molesworth Inspired Refined Rustic Cowboy Western Style Basket Horse Saddle Carving Natural Twigs

    -------------------------------- This is a Basket I made recently, Molesworth-Inspired, with a Horse Saddle Carving on each end, painted black. This type of basket is FOR SALE contact me at email: [email protected] for more information ------------------------------- To see other...
  6. Nakashima Inspired End Table Spalted Sycamore Natural Live Edge Top walnut base contemporary modern

    I just finished this Natural Edged Nakashima Inspired end table. It is the first finished in a set of two tables. The extraordinary wood for the top is Kansas Spalted Sycamore, with a Kansas black walnut modern contemporary base. The matching table top on the next table will be the bookmatched...
  7. Reclaimed Grey Barn Siding Sliding Door

    Here's a nice looking grey siding covered sliding barn door we did. This wood came from Iowa. This cool door covers the entry to a pantry and uses our 8″ v groove wheel hardware. I love this oversized hardware. It glides so smooth. I used the new style black phenolic door guide I recently...
  8. Naughty (Knotty) Refined Rustic White Oak & Black Walnut China Hutch, Antler Handles, Antique Glass

    This is my entry in the "A Knot Like No Other" category for the Winter Lumberjock woodworking Competition. Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Project Story: I have a hard time choosing one knot that is special on this project though. I suppose the story behind the knot...
  9. Nakashima Inspired Conoid Side Table Burl Maple Slab Top with Black Walnut Modern Contemporary Base

    I just finished this Natural Edged Nakashima Inspired Conoid style base side, coffee, or end table. Dimensions: 38.5" long x 22" wide, by 18" tall. This was a commissioned piece, if you would like something similar, start by visiting my Etsy store item __ The extraordinary wood for the top...
  10. Calico Sliding Barn Door

    This door was featured in North Vally Magazine and East Valley Magazine as well as Scottsdale.org. It has reclaimed barn wood material from 3 different states. It's a huge door! Weighs a lot. It has a flat lacquer finish and the steel has a special rusty patina and lacquer on it. Custom...
  11. Reclaimed White Oak Threshing Floor Table with Gas Pipe Base

    This is some of my favorite wood for reclaimed table tops. It has so much character. This top sits on a gas-pipe base and is bar height (42"). I put some bowtie (butterfly) inlays in the top for fun. The finish is Briwax per customer request. These particular boards came from a 200+ year old...
  12. Cowboy Western Molesworth Horse Ranch Style Resort Home Guest Suitcase Luggage Support Rack Carved

    This is a custom designed Western Luggage Rack, made from Walnut, with distressed saddle leather for straps. If you would like to order one, or a whole set of these racks, let me know at my email address: [email protected] The carved artwork on the side where the Gold Star is located can be...
  13. Jigs & Fixtures
    Alright well I researched and planned all winter to build an extension/router table for my contractors saw. But since I recently upgraded to a cabinet model things have changed a lil bit. 2 things I've noticed with a cabinet model are that there are no bolt holes on the wings for securing an...
  14. Woodworking Skill Share
    Hey everybody, I am working on a Manzanita Burl bowl and have a couple questions about the finish. I have turned the outside of the bowl and have sanded it down to 220 grit. I then took a brown paper bag and kinda polished it with it turning on the lathe. I really don't know why I did that...
  15. Designing Woodworking Projects
    Hello everyone, I'm new to the forum but have been woodworking for almost 3 years now. I'm excited to be a new part of this community! I would like some input/feedback on a project for a friend of mine. He would like me to build 4 of the same table for a room that he is going to use for craft...
  16. Power Tools, Hardware and Accessories
    I've been thinking for a long time about making a V-drum sander. I've got a tiny shop, so space is a premium. I have a Delta bench grinder and rarely use it. I want to keep it for when I do actually need it, but the idea of giving it double duty really appeals to me. The motor speed at its...
  17. Power Tools, Hardware and Accessories
    Hi All, I've recently been making small boxes, but I'm struggling to find a source of decent quality but not too expensive hardware - hinges and catches etc. I tend to make the boxes out of fairly thin material - no more than 10mm (about 3/8) thick so the hinges in particular have to be small...
1-17 of 17 Results
Top