LumberJocks Woodworking Forum banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 109 Results
  1. Journal Replacement Chest of Drawers

    LONG time ago, back when Norm Abram was still in his little shop...I cobbled up a pile of scraps from the shop...plywood, pine, pallet wood, and made a small 4 drawer Chest of Drawers.. yeah...I think I can do a wee bit better than this? Handles were glued and screwed in place...doubt IF I can...
  2. Walnut Chest of drawers

    Walnut dresser built last weekend for a friend.
  3. Chest of drawers

    I was on a roll doing stile and rail cabinet construction and I wanted to match my armoire. The drawer fronts are black walnut door shins wraped in 3/8" black walnut. The styles and rails are oak.The top is oak ply wrapped in Black walnut. The inner frames the drawers slide on are solid oak as well.
  4. An Artist's Chest of Drawers

    One of my young granddaughters is an avid artist who needed a place where she could organize and store all of her art supplies which includes oils, acrylics, watercolor paints, brushes, scissors and much more. So I built this 11 drawer chest which measures 28" long by 16" high and 9.75" deep...
  5. Dresser

    This is a dresser I made for my younger son this fall. It is patterned after a dresser in "Chests of Drawers" by Bill Hylton and the quilted maple drawer fronts were inspired by EdinSD here on LJ. My son wanted two things. The "giraffe" pattern and the and the rail across the top so things...
  6. A Chest of Drawers and Nightstand for Michael

    Phew - I finally completed this project! It took me over a year (I started it, took 8 mo off from the shop, then returned to complete it). It's walnut with cherry bowties and pegs. Maple back, drawer sides, and carcass parts. This thing is a beast! Very stout and heavy! I learned a lot with...
  7. Chest of drawers

    A modern chest of drawers made of sapele (Entandrophragma cylindricum) with home made brass pulls. Solid wood throughout, except drawer bottoms. Top and outer sides are made of single boards that wrap around the perimeter for visual continuity. Dimensions are 109×84 x 42 cm (43" x 33" x 17")...
  8. Walnut and Cherry Dresser

    I built this dresser for my son, and luckily got it finished only a couple weeks before he was born. The design is based off of another project I saw on LJ which I believe is based off of a design from the Wood Whisperer. The dresser is made of walnut and cherry with maple drawers. Thanks for...
  9. Pine Chest of Drawers

    I was asked to build a traditional pine chest with flush fitting drawers and came up with this design. The client wanted deep drawers to store bulky sweaters and such so I used modern telescopic slides to facilitate ease of operation. The drawer fronts are made from local South African pine. I...
  10. Free Form Chest of Drawers

    LJ's A while back I finished a smaller version of this project. This one is about 1020mm high and will be sold soon. The money will go to different charity's like KIKA and WARCHILD. Wood : pear and a type of wood which name i dont know in the english language Thanks for watching
  11. nightstands

    My nightstands were based on the contemporary dresser design in the chest of drawers book by Taunton Press - Bill Hylton. I will never again make something using loose tenon construction - it took too long to preciesly drill the mortises and make the loose floating tenons. I felt it was a very...
  12. Bamboo Chest of Drawers

    My son said he wanted his dresser made out of Bamboo. Looked into the options to get Bamboo, which was few so I thought I would use Bamboo flooring. Thought I was onto something original, then found out later others had used bamboo flooring to make projects as well. Nonetheless, it was an...
  13. "Waltz of the Flowers" carved wooden chest of drawers (2018)

    "Waltz of the Flowers" hand carved basswood chest of drawers. Chest of drawers dimensions: length: 14,2 cm (5,59"), width: 8,5 cm (3,35"), height: 11,5 cm (4,53"). Inner dimensions of the drawers: length: 11,5 (4,53") and width: 7,5 cm (2,95"), height: 1,5 cm (0,59"). Finish:Danish oil, milk...
  14. cherry chest of drawers

    This is my masterpiece so far, it was a Christmas present for my wife. It is made of almost all solid cherry with poplar drawer parts as a secondary wood. The top is joined to the sides with hand cut through dovetails. The drawers feature hand cut half blinds at the front and through dovetails...
  15. Maple dresser

    I built this dresser for a close friend , she had lended me some cash for a good kijiji buy on Lie Nielsen tools so as a favour and to repay her i built this. It ended up getting stained black but i like the look of the maple here.
  16. Chest of Drawers

    My version of the original Wood Whisperer chest of drawers. Being a learner still I wanted to attempt a few new things, the first being case work like what you might find in a dresser etc. The other two were (a) mostly hand done half-blind dovetails and (b) veneering. I'll address those below...
  17. A Tansu Style Cabinet

    We finished this piece this week after wrestling for a time with the somewhat unbelievable number of pieces of wood involved. Looks pretty straightforward now that's done but there is a lot to it's construction. Further details and many process photos on my blog at...
  18. Contemporary Chest of Drawers

    I actually finished this back in late August but I just released 3 video podcasts on my site detailing the entire build. If you are interested please check out episode 77, episode 78, and episode 79. This was the first project that I actually cut all the dovetails by hand and a special thanks...
  19. Chest of Drawers "Onderbroken"

    LJ's I finished this chest of drawers about 2 week back. It's called "Onderbroken", that's dutch. It means that the line has been broken. It's made from walnut and maple. Always a nice combination. dimensions : 310mmx240×810mm The front has been cut out of a 52mm piece of american walnut that...
  20. Fremont Chest of Drawers

    My designs are fluid - always open for 'tweaking". I love to re-visit pieces and make small aesthetic improvements here and there. Usually, the changes take place with the next commission of the piece - especially if it's a large piece such as a chest of drawers. For many years I have wanted to...
1-20 of 109 Results
Top