LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 500 Results
  1. Projects Trays

    I acquired some burl veneer, nobody seemed to know what kind, but it looks cool, I had some birds-eye maple veneer around so I made some trays. I made some simple frames with an outside round over and an inside chamfer. Veneer is glued to 3mm plywood, trimmed and glued into a rabbit on the...
  2. Projects The Lantern Cabinet

    For some time I have tried to find my own voice in my designs. I have made so many pieces "in the style of ..." and that was that. I wanted a design language of my own. This piece is an attempt to go in that direction and to extend the union of mission period and Asian styles. I read that...
  3. Projects Annual ornaments

    We try every year to give something special to our friends and family for Christmas. This is my design for this year. Merry Christmas & happy Holidays
  4. Projects Two-Legged Rocking Chair - Prototype

    My apologies for the double-post... somehow, I missed getting the picture in. Lumberjocks – Two-legged Rocking Chair – prototype This is the 4th large-piece prototype that I’ve posted to Lumberjocks, and do so to generate comments and discussion – perhaps inspire someone to take the concept or...
  5. Projects Shaker-ish console table with ambrosia maple and cherry.

    One of my questions in building this was what to do about the worm holes in the top. In the end, I just left them. If this were to be a writing table, that would be a problem I suppose.
  6. Projects Cherry Humidor

    This is the latest in my first batch of humidors soon to go on Etsy. I used cherry again, and the same ogee-moulded routing pattern for the walls. I put a simple wide chamfer on the edges of the top to keep it simple. The top has a veneer of chestnut burl, it ended up matching the cherry fairly...
  7. Projects Large cherry mirror in golden ratio proportions

    Mitered corners strenghtened with splines. Decorative flutes, birch plywood back. Osmo oilwax finish
  8. Projects Cherry coffee station cabinet

    We had just completed an extensive kitchen remodel, but we wanted a small showpiece to really add a finishing touch — plus we needed a nice coffee station. One morning I drew up plans for this small cherry cabinet over — you guessed it — coffee. It looked promising, so I got to work. Most of my...
  9. Projects Contemporary Office Desk using Shaper Origin

    I modified a desk design from Matt Downer Designs in Colorado. I was looking for a desk to build online and he had designed and built one I liked. You can check out his original design at Desks & Tables - Matt Downer Designs. I used my Shaper Origin for the curves - which there are many. I...
  10. Projects Humidor in Cherry

    A pretty basic humidor, it was my first time trying out a new router bit intended for cabinet making; I figured it would make for an interesting lid design. Lined in Spanish cedar, of course. Brusso hinges (what else is there?). Added a couple dividers. I used GF Arm-r-seal as a finish. The seal...
  11. Projects Sapele bathroom organizer hamper towels

    My Aunt in Sun Prairie Wisconsin wanted a bathroom organizer for her newly remodeled bathroom. It ended up being relatively tall with the floating top at 59 inches. It was basically 6 different shaker panels put together. The weave on the side is consistent with master bedroom furniture I...
  12. Projects Christmas in July ... 17 down, ??? to go

    17 done, ??? more to go as the list keeps growing. These 17 will be delivered in early July.
  13. Projects Found a spot in my shop not being used.

    I have a 5/8" oil field sucker rod in the middle so it will spin around easy! |This was the last place in my shop I don't have junk and things cluttering up and this is great for it is out of the way hanging over the sink. They do get dusty but a little air every once in a while makes it back...
  14. Projects Comb Back Stick chair

    I made this chair at a Chris Schwarz 5 day class held at Lost Art Press store in Covington, Kentucky. I was able to bring it home unassembled in a suit case which saved a lot of shipping cost. During home assembly I ran into one hitch when I fractured the arm. I was able to glue it up and...
  15. Projects 4'Pencil Well

    This is the bonus item that i included with the main item for the Swap. Created by gluing thin strips of Maple to each side of a piece of Cherry, (half of the strips milled up). Cut the wedges with the wedgie sled and added smaller pieces of Maple to create a verticle joint. All of the rings...
  16. Projects Burl Pen Set

    Made a set of pens as a gift for family. They are made from what I think is Oak stump/root or a burl. the chunk of wood looks like a stumper had it's way with it but I guess it could have been a chainsaw as well. This is one of those projects I wish I could pass around because the pictures...
  17. Projects Cherry platform bed

    This is my fourth bed build, and the third one of my own design. I have got beautiful 9" wide, 4/4" thick cherry boards with very nice grain, and started building around that. As you can see, I love cloud lift detail and use it everywhere :) All permanent joinery is made with floating tenons...
1-20 of 500 Results
Top