Search Results for ‘charger’

I made several variations of thelse around Christmas time out of different species of wood. Very simple in design but are great for a desktop or nightstand. Dipped them in mineral oil for protection and some rubber feet to get them off the surface so the charger cord wouldn't bind up.

This is my latest project for my workshop. The design is based off project by LJ HickoryHill found here. The design of the drill shelf was based on ShopNotes Issue 58 along with the design of the drawer. The case is made out of 3/4" plywood. The drawer is made out of 1/2" plywood with a 1/4"...

iPhone charging cables are frustratingly short, so I made an iPhone charger / holder to go on the wall. I used a small block of persimmon cut from a large slab I had on hand for the "holder" and a piece of walnut for the mounting plate. I used a mounting plate so I wouldn't have visible...

Hello again, here I present my fourth project. For the battery-packs of my cordless electic tools from BOSCH Professional I needed an cabinet to store my charger and many battery-packs. Each charger should switch on and off individually. The style however adaptive to my cabinet and workbench...

Not a terribly exciting project, but after replacing two of my lithium ion batteries and a fried charger, I finally got around to making a charging station with an in-built timer. Replacement batteries are not inexpensive, and I'm told that leaving them on the charger for long periods of time...

I JUST FINISHED THIS TODAY FOR MY I PHONE AND I GOT THE PDF FROM STEVE GOOD ALTHOUGH THE PDF DIDNT COME WITH ALL OF THE CHARGING DOCK AND I AM NOT VERY GOOD A T WOODWORKING YET SO THE BACK CAME OUT TERRIBLE BUT THE FRONT IS FINE

Quick and dirty charger station. I don't like to spend time on shop furniture. (Fun fact: that festool charger used to belong to the wood whisperer! I picked up his old Carvex.)

Hey Guys, One of my co-workers liked my phone dock so much that she asked me to make one for her Iphone 5. I used Rock Maple and Black Walnut, and made a few design changes. I like this way this one looks much better than the first one I made, what do you think? Thanks for looking. Jayson

I saw this as I was scrolling through the projects last night and I have been meaning to make one so I went to scrap bin and found some peices of a countertop and old KD bookcase I had and did it today.

So, I recently purchased a new s6 edge plus phone that supports wireless charging. As a woodworker, I'm always looking for a reason to build something new, and this was no different. The actual wireless charger doesn't look that great on it its own, so I decided to spruce it up a bit. Plus...

15×30 by 24 inches tall. Made from Cherry. This table fills the need of having a charging station for phones and tablets as well has having drawer space for extra remotes. I tried a few different hinge combinations and found this setup worked the best for this. Finished with General Finish...