LumberJocks Woodworking Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Room Divider

    So my wife recently started working from home and she asked me to make her a room divider so as that the kids couldn't walk through the entry way into her office. She gave me some features that she wanted the divider to have some of which are: Portable Tall Multi-functional Have a nice design...
  2. Mobile Workbench - Enhanced Caster Set-up

    Canadian price: https://www.leevalley.com/en-ca/shop/hardware/casters-and-wheels/110198-workbench-casters To engage casters, insert the dowel (1" dia.) into the hole and turn.
  3. Easy Shop Table II

    I have been building a number of these tables for use in my shop. This is my latest set. These are built using re-dimensioned construction lumber (2 X10's). By using larger lumber cut down, I can get some really clean and straight pieces. If I used 2 X 4's, I would have had a lot of warping...
  4. Scrap Lumber Cart

    So after enough hints from people that I need to have a better storage system in place to store my lumber scrap I decided to design and build my own little mobile scrap cart. It's a very basic design using 3/4" plywood and 3/4" MDF and I used my trusty Kreg K4 pocket hole jig to assemble...
  5. End grain butchers block

    The end grain timber on this butchers block is oak and the frame Scandinavian pine. The end grain can take enormous punishment from chopping and cutting tools as well as red hot pans etc without any detrimental effects on the structure or appearance. Dimensions are 4' * 2' but I have made them...
  6. Woodworking Skill Share
    Are there any hardwoods that are considered unsafe for cutting boards? I have a large piece of wenge but never see people using it for cutting boards. Is it safe to use? I use food safe finishes so I am only concerned with the wood itself.
  7. Blogs
    Workbench Base Finished I am busy building a split top Roubo workbench and have recently finished the base. The base is built from some left-over African Rosewood I had, while the top will be Hard Maple. The vices and sliding deadman will be made from Leadwood. Next up is installing some...
  8. Blogs
    oak bookcase This bookcase had to be designed for a Church, and be movable. It also had to fit comfortably against the back of pews when been stored. I used European white oak which i quarter sawed myself, the shelves sit 90 degrees to the face edge. I made hold down blocks for the top, any...
  9. Blogs
    Sawstop Contractor Mobile Base for 36" T-Glide Rails So here it is. I am basing this project on one several other talented individuals have done. They include, but are not limited to, Zzzzdoc, Tedth66, and Spencer. I only have the rough outline right now but plan on cutting wood this week...
1-9 of 9 Results
Top